Long-term fracture load of all-ceramic crowns: Effects of veneering ceramic thickness, application techniques, and cooling protocol
Nenhuma Miniatura disponível
Data
2020-11-01
Autores
Lima, Júlia-Magalhães-da Costa
Tribst, João-Paulo-Mendes [UNESP]
Anami, Lilian-Costa
de Melo, Renata-Marques [UNESP]
Moura, Dayanne-Monielle-Duarte
e Souza, Rodrigo-Othávio-Assunção
Bottino, Marco-Antonio [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Background: To evaluate, in vitro, the effects of the cooling protocol, application technique, and veneering ceramic thickness on the fracture resistance of ceramic crowns with Y-TZP frameworks. Material and Methods: 80 frameworks were made from zirconia by the CAD/CAM technique and divided into 8 groups (n = 10) according to the factors: “application technique” (stratified-L and pressed -P), “thickness” (1 mm and 2 mm), and “cooling protocol” (slow-S and fast-F) of the feldspathic veneering ceramic. After, all crowns were cemented over G10 preparations with resin cement (Panavia F, Kuraray), mechanically cycled (2×106 cycles, 200 N, 3Hz), and subjected to the axial compression resistance test (0.5 mm/min, 10 kN). The data (N) underwent descriptive statistical analysis by 3-way ANOVA and Tukey's test (5%). Fracture analysis was performed to determine the possible origin of failure. Results: The factors “cooling protocol” (P=0.0058) and “application” technique (P=0.0001) influenced the fracture resistance of the crowns. For pressed veneer technique, the P2S (4608.9±464.5). A presented significantly higher results than that P2F(3621.1±523.0)BCD (Tukey's test). For the stratified technique, this difference was not observed (P>0.05). The thickness of the veneering ceramic was not significant regardless of the cooling protocol and technique (P>0.05). The predominant failure mode was chipping of the ceramic veneer originating in the subsurface. Conclusions: The pressed technique, used with a slow-cooling protocol, leads to the best outcome for the veneering of all-ceramic crowns.
Descrição
Palavras-chave
application technique, ceramics, cooling protocol, thickness, Zirconia
Como citar
Journal of Clinical and Experimental Dentistry, v. 12, n. 11, p. e1078-e1085, 2020.