Monitoring the process mean with an ATTRIVAR chart
Nenhuma Miniatura disponível
Data
2020-01-01
Autores
Costa, Antonio Fernando Branco
Faria Neto, Antonio [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
In this article, we propose an ATTRIVAR chart to control the process mean. With the ATTRIVAR chart, the sampling is performed in two stages, collecting attribute and variable sample data from the same sample (attribute plus variable data–ATTRIVAR). That is, if the first m items of the sample fail to pass the go gauge test, or they pass the no-go gauge test, the sampling moves on to stage two, where the quality characteristic X of the first m and the remaining n-m items of the sample is measured. Otherwise, the sampling is interrupted and the process is declared to be in control. The number of tested items, if one, or two, or as many as m, is only known after the completion of the first stage. At the second stage, the (Formula presented.) value is computed and used to decide the state of the process. It is worthwhile to stress that the go/no-go gauge test truncates the X distribution and, because of that, the mathematical development to obtain the (Formula presented.) distribution is not trivial. The ATTRIVAR chart signals faster than the Double Sampling (Formula presented.) chart and, more important than that, it is simpler to use because the go/no-go gauge test reduces the frequency with which the quality characteristic X of the sample items is measured. The ATTRIVAR chart is also faster and simpler than the mixed chart. With the mixed chart, the sampling is also performed in two stages; the difference is that all items of the sample are always submitted to the go/no-go gauge test before deciding to go to stage two, where the (Formula presented.) value is computed.
Descrição
Palavras-chave
attribute/variable-type inspections, ATTRIVAR chart, mixed chart, process mean
Como citar
Communications in Statistics - Theory and Methods.