Effects of different disinfection treatments on the natural microbiota of lettuce

Nenhuma Miniatura disponível

Data

2003-09-01

Autores

Nascimento, M. S. [UNESP]
Silva, N.
Catanozi, M. P.L.M. [UNESP]
Silva, K. C.

Título da Revista

ISSN da Revista

Título de Volume

Editor

Resumo

In this study, water and eight sanitizing solutions (vinegar at 6, 25, and 50%; acetic acid at 2 and 4%; peracetic acid at 80 ppm, sodium hypochlorite at 200 ppm, and sodium dichloroisocyanurate at 200 ppm) were compared in terms of their effectiveness against the natural microbiota of lettuce. All of the samples were kept in contact with the sanitizing solutions for 15 min, and the effectiveness of a sanitizing agent was evaluated on the basis of the number of decimal reductions of the total aerobic mesophilic count, the mold and yeast count, the total coliform count, and the Escherichia coli count. The average initial levels of these organisms in the samples were 6.94 log10 CFU/g for aerobic mesophilic microorganisms, 5.62 log10 CFU/g for molds and yeasts, and 3.25 log10 CFU/g for total coliforms. Of 10 samples analyzed, only 4 contained E. coli, and the average initial level of this microorganism in these 4 samples was 1.64 log10 CFU/g. Salmonella was not detected in any of the samples tested. The decimal reductions of the populations of aerobic mesophilic microorganisms, molds and yeasts, total coliforms, and E. coli were 0.78, 0.87, 0.82, and >0.14 log10 CFU/g, respectively, in water; 2.89, >3.41, >2.21, and >0.26 log10 CFU/g, respectively, in 50% vinegar; 2.42, >3.20, >1.99, and >0.26 log10 CFU/g, respectively, in 25% vinegar; 1.83, 2.57, 1.58, and >0.26 log10 CFU/g, respectively, in 6% vinegar; 3.91, >3.58, >2.25, and >0.26 10g10 CFU/g, respectively, in 4% acetic acid; 3.37, >3.53, >2.25, and >0.26 log 10 CFU/g, respectively, in 2% acetic acid; 1.85, 2.32, 1.44, and >0.20 log10 CFU/g, respectively, in 80 ppm of peracetic acid; 2.63, 2.75, 1.91, and >0.26 log10 CFU/g, respectively, in 200 ppm of sodium hypochlorite; and 3.23, >3.08, >1.95, and >0.26 log 10 CFU/g, respectively, in 200 ppm of sodium dichloroisocyanurate. Statistical analysis of the results showed that the effectiveness levels for all of the sanitizing agents tested were equivalent to or higher than that for sodium hypochlorite at 200 ppm.

Descrição

Palavras-chave

Como citar

Journal of Food Protection, v. 66, n. 9, p. 1697-1700, 2003.