Highly corrosion resistant siloxane-polymethyl methacrylate hybrid coatings
Nenhuma Miniatura disponível
Data
2012-08-01
Autores
Hammer, Peter [UNESP]
dos Santos, Fabio C. [UNESP]
Cerrutti, Bianca M. [UNESP]
Pulcinelli, Sandra Helena [UNESP]
Santilli, Celso Valentim [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Springer
Resumo
Siloxane-polymethyl methacrylate hybrid films were deposited on carbon steel substrates by dip-coating from a sol prepared by acid-catalyzed hydrolytic co-polycondensation of tetraethoxysilane (TEOS) and 3-methacryloxy propyl-trimethoxysilane (MPTS), followed by radical polymerization of methyl methacrylate (MMA). Structural properties of the hybrids were studied using Si-29 and C-13 nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA), as a function of the MMA/MPTS ratio, which ranged between 2 and 10. The efficiency of corrosion protection of hybrid-coated carbon steel was investigated by XPS, potentiodynamic polarization curves and electrochemical impedance spectroscopy after immersion of the material in acidic and neutral saline aqueous solution. The NMR and TGA results indicate a high degree of polycondensation (84%) and elevated thermal stability of 410 A degrees C for the hybrid film with a MMA/MPTS ratio of 8, exhibiting also and excellent adhesion to the substrate. The XPS analysis confirmed the variation of the MMA phase in the hybrid, and showed that no corrosion-induced changes had occurred after 18 days immersion of the coated steel in 3.5% NaCl solution. Potentiodynamic polarization curves have shown that the hybrid coating prepared using a TEOS/MPTS ratio of 8 yielded the best anti-corrosion performance. It acts as a very efficient corrosion barrier, increasing the total impedance by almost 6 orders of magnitude and reducing the current densities by 4 orders of magnitude, compared to the bare electrode. The obtained results are discussed based on the correlation of structural information with impedance data presented for both electrolytes in the form of electrical equivalent circuits.
Descrição
Palavras-chave
Hybrid coatings, Corrosion protection, Bonding structure, Carbon Steel, Electrochemical characterization
Como citar
Journal of Sol-gel Science and Technology. Dordrecht: Springer, v. 63, n. 2, p. 266-274, 2012.