Evaluation of grinding fluids in the grinding of a martensitic valve steel with CBN and alumina abrasives
Nenhuma Miniatura disponível
Data
2003-01-01
Autores
da Silva, E. J.
Bianchi, E. C.
de Oliveira, JFG
de Aguiar, P. R.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Professional Engineering Publishing Ltd
Resumo
In this paper the performances of different cutting fluids and grinding wheel types were analysed in the grinding of SAE HVN-3 workpieces. The resulting residual stress, wheel wear and roughness were evaluated. The influence of the cutting fluid jet velocity v(j) was also analysed. As a conclusion, the lubrication ability seems to be the governing factor in the cutting fluid performance. The use of CBN wheels can significantly reduce the thermal damage in grinding, leading to compressive residual stresses. The CBN wheel and the cutting oil give an optimum combination for performing this grinding operation.
Descrição
Palavras-chave
grinding wheel, cutting fluid, residual stress
Como citar
Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. Bury St Edmunds: Professional Engineering Publishing Ltd, v. 217, n. 8, p. 1047-1055, 2003.