Investigation of Ferroelectric Layered Perovskite Barium Bismuth Tantalate Prepared by Solid-State Reaction
Nenhuma Miniatura disponível
Data
2012-01-01
Autores
Simões, Alexandre Zirpoli [UNESP]
Stojanovic, B. D.
Lazarevic, Z. Z.
Romcevic, N. Z.
Varela, José Arana [UNESP]
Longo, Elson [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Taylor & Francis Ltd
Resumo
Barium bismuth tantalate-BaBiTa2O9 has been prepared by conventional method based on solid-state reaction using BaCO3, Bi2O3 and Ta2O5 as starting materials. It was added excess of 10 mol% of bismuth aiming to improve the dielectric and ferroelectric properties. The calcinated powders and sintered pellets were analyzed by XRD and SEM. BaBiTa2O9 ceramics with high density was obtained at sintering temperature of 1050 degrees C for 2 h. The faced grains with a rod-like morphology were observed for BaBiTa2O9 with 10 mol% excess bismuth. The dielectric constant measured at frequency of 100 kHz at room temperature was 389 with dielectric loss of 0.032. BBT ceramic prepared with excess of 10 mol% bismuth possesses ferroelectric properties with remnant polarization of P-r approximate to 15 mu C cm(-2) and coercive field of E-c approximate to 58 kV cm(-1). The hysteresis loop is very well performed with the shape characteristic of ferroelectric materials.
Descrição
Palavras-chave
BaBiTa2O9, powder ceramic, solid-state reaction, ferroelectric properties
Como citar
Ferroelectrics. Abingdon: Taylor & Francis Ltd, v. 428, p. 27-35, 2012.