Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.
Carregando...
Data
1990-12-01
Autores
Machado Cucci, A. L.
Fuller, J. B.
Giampaolo, E. T.
Leonardi, P.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.
Descrição
Palavras-chave
chromium derivative, denture, human, materials testing, premolar tooth, Bicuspid, Chromium Alloys, Dental Casting Technique, Denture Retention, English Abstract, Human, Materials Testing
Como citar
Revista de Odontologia da UNESP, v. 19, n. 1, p. 251-258, 1990.