A photogrammetric method for single image orientation and measurement
Nenhuma Miniatura disponível
Data
2005-06-01
Autores
Tommaselli, Antonio Maria Garcia [UNESP]
Reiss, Mario Luis Lopes [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The aim of this paper is to present a photogrammetric method for determining the dimensions of flat surfaces, such as billboards, based on a single digital image. A mathematical model was adapted to generate linear equations for vertical and horizontal lines in the object space. These lines are identified and measured in the image and the rotation matrix is computed using an indirect method. The distance between the camera and the surface is measured using a lasermeter, providing the coordinates of the camera perspective center. Eccentricity of the lasermeter center related to the camera perspective center is modeled by three translations, which are computed using a calibration procedure. Some experiments were performed to test the proposed method and the achieved results are within a relative error of about 1 percent in areas and distances in the object space. This accuracy fulfills the requirements of the intended applications. © 2005 American Society for Photogrammetry and Remote Sensing.
Descrição
Palavras-chave
Calibration, Error analysis, Image processing, Linear equations, Mathematical models, Billboards, Digital image, Eccentricity, Single image orientation, Photogrammetry, digital image, measurement method, photogrammetry
Como citar
Photogrammetric Engineering and Remote Sensing, v. 71, n. 6, p. 727-732, 2005.