Separating interface state response from parasitic effects in conductance measurements on organic metal-insulator-semiconductor capacitors
Carregando...
Data
2008-03-01
Autores
Taylor, D. M.
Alves, Neri [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
American Institute of Physics (AIP)
Resumo
A simple model is developed for the admittance of a metal-insulator-semiconductor (MIS) capacitor which includes the effect of a guard ring surrounding the Ohmic contact to the semiconductor. The model predicts most of the features observed in a MIS capacitor fabricated using regioregular poly(3-hexylthiophene) as the active semiconductor and polysilsesquioxane as the gate insulator. In particular, it shows that when the capacitor is driven into accumulation, the parasitic transistor formed by the guard ring and Ohmic contact can give rise to an additional feature in the admittance-voltage plot that could be mistaken for interface states. When this artifact and underlying losses in the bulk semiconductor are accounted for, the remaining experimental feature, a peak in the loss-voltage plot when the capacitor is in depletion, is identified as an interface (or near interface) state of density of similar to 4 x 10(10) cm(-2) eV(-1). Application of the model shows that exposure of a vacuum-annealed device to laboratory air produces a rapid change in the doping density in the channel region of the parasitic transistor but only slow changes in the bulk semiconductor covered by the gold Ohmic contact. (C) 2008 American Institute of Physics.
Descrição
Palavras-chave
Como citar
Journal of Applied Physics. Melville: Amer Inst Physics, v. 103, n. 5, p. 6, 2008.