Sequential Sampling Plan for Tenuipalpus heveae Baker (Acari: Tenuipalpidae) on Rubber Tree
Nenhuma Miniatura disponível
Data
2013-04-01
Autores
Martins, G. L M [UNESP]
Vieira, M. R. [UNESP]
Barbosa, J. C. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The objective of the present study was to develop a sequential sampling plan for the decision-making process to control Tenuipalpus heveae Baker (Acari: Tenuipalpidae), an important pest of the rubber tree crop. The experimental area was represented by 1,000 plants of the RRIM 600 clone divided in 100 plots with 10 plants each. Leaves were collected and the number of mites determined under laboratory conditions. The sequential sampling plan was developed in accordance with the Sequential Test Likelihood Ratio. The value 0.10 was pre-established for α and β representing type I and type II errors, respectively. The level of control adopted was six mites per 12 cm2. The operating characteristic curve and the curve of maximum expected sample were determined. Two lines were generated: the upper one, when the condition for chemical control is recommended (S1 = 23.3080 + 2.1972); and the lower, when chemical control is not recommended (S0 = -23.3080 + 2.1972). Sample size for the decision-making process to control T. heveae requires 6 to 18 plants. © 2013 Sociedade Entomológica do Brasil.
Descrição
Palavras-chave
Hevea brasiliensis, Integrated pest management, mites, monitoring
Como citar
Neotropical Entomology, v. 42, n. 2, p. 200-204, 2013.