Microcantilever chaotic motion suppression in tapping mode atomic force microscope
Nenhuma Miniatura disponível
Data
2013-08-01
Autores
Balthazar, José Manoel [UNESP]
Tusset, Angelo Marcelo
De Souza, Silvio Luiz Thomaz
Bueno, Atila Madureira
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
The tapping mode is one of the mostly employed techniques in atomic force microscopy due to its accurate imaging quality for a wide variety of surfaces. However, chaotic microcantilever motion impairs the obtention of accurate images from the sample surfaces. In order to investigate the problem the tapping mode atomic force microscope is modeled and chaotic motion is identified for a wide range of the parameter's values. Additionally, attempting to prevent the chaotic motion, two control techniques are implemented: the optimal linear feedback control and the time-delayed feedback control. The simulation results show the feasibility of the techniques for chaos control in the atomic force microscopy. © 2012 IMechE.
Descrição
Palavras-chave
Atomic force microscopy, chaos, control, nonlinear dynamics, tapping mode atomic force microscope, Chaotic motions, Control techniques, Imaging quality, Linear feedback control, Micro-cantilevers, Sample surface, Tapping modes, Time-delayed feedback, Chaos theory, Chaotic systems, Composite micromechanics, Control, Dynamics, Feedback control
Como citar
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, v. 227, n. 8, p. 1730-1741, 2013.