Physical-chemical and thermodynamic analyses of ethanol steam reforming for hydrogen production

Nenhuma Miniatura disponível

Data

2006-08-01

Autores

Carlos Caetano de Souza, Antonio
Luz-Silveira, Jose
Sosa, Maria Isabel

Título da Revista

ISSN da Revista

Título de Volume

Editor

Asme-amer Soc Mechanical Eng

Resumo

Steam reforming is the most usual method of hydrogen production due to its high production efficiency and technological maturity the use of ethanol for this purpose is an interesting option because it is a renewable and environmentally friendly fuel. The objective of this article is to present the physical-chemical, thermodynamic, and exergetic analysis of a steam reformer of ethanol, in order to produce 0.7 Nm(3)/h of hydrogen as feedstock of a 1 kW PEMFC the global reaction of ethanol is considered. Superheated ethanol reacts with steam at high temperatures producing hydrogen and carbon dioxide, depending strongly on the thermodynamic conditions of reforming, as well as on the technical features of the reformer system and catalysts. The thermodynamic analysis shows the feasibility of this reaction in temperatures about 206 degrees C. Below this temperature, the reaction trends to the reactants. The advance degree increases with temperature and decreases with pressure. Optimal temperatures range between 600 and 700 degrees C. However, when the temperature attains 700 degrees C, the reaction stability occurs, that is, the hydrogen production attains the limit. For temperatures above 700 degrees C, the heat use is very high, involving high costs of production due to the higher volume of fuel or electricity used. The optimal pressure is 1 atm., e.g., at atmospheric pressure. The exergetic analysis shows that the lower irreversibility is attained for lower pressures. However the temperature changes do not affect significantly the irreversibilities. This analysis shows that the best thermodynamic conditions for steam reforming of ethanol are the same conditions suggested in the physical-chemical analysis.

Descrição

Palavras-chave

steam reforming, ethanol, hydrogen production, exergetic analysis, energetic analysis

Como citar

Journal of Fuel Cell Science and Technology. New York: Asme-amer Soc Mechanical Eng, v. 3, n. 3, p. 346-350, 2006.