Sugarcane bagasse cellulose/HDPE composites obtained by extrusion
Nenhuma Miniatura disponível
Data
2009-02-01
Título da Revista
ISSN da Revista
Título de Volume
Editor
Elsevier B.V.
Resumo
Natural fibers used in this study were both pre-treated and modified residues from sugarcane bagasse. Polymer of high density polyethylene (HDPE) was employed as matrix in to composites, which were prodUced by mixing high density polyethylene with cellulose (10%) and Cell/ZrO(2)center dot nH(2)O (10%), using an extruder and hydraulic press. Tensile tests showed that the Cell/ZrO(2)center dot nH(2)O (10%)/HDPE composites present better tensile strength than cellulose (10%)/HDPE composites. Cellulose agglomerations were responsible for poor adhesion between fiber and matrix in cellulose (10%)/HDPE composites. HDPF/natural fibers composites showed also lower tensile strength in comparison to the polymer. The increase in Young's modulus is associated to fibers reinforcement. SEM analysis showed that the cellulose fibers insertion in the matrix Caused all increase of defects, which were reduced When modified cellulose fibers were Used. (C) 2008 Elsevier Ltd. All rights reserved.
Descrição
Palavras-chave
Fibers, Polymer-matrix composites, Mechanical properties, scanning electron microscopy (SEM), Extrusion
Como citar
Composites Science and Technology. Oxford: Elsevier B.V., v. 69, n. 2, p. 214-219, 2009.