Microstructural, physical, and fluid dynamic assessment of spinel-based and phosphate-bonded investments for dental applications

Página do item simplificado
dc.contributor.authorInnocentini, Murilo D. M.
dc.contributor.authorChacon, Welton S.
dc.contributor.authorCaldato, Rafael F.
dc.contributor.authorPaula, Gustavo R.
dc.contributor.authorAdabo, Gelson Luis [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversidade de Ribeirão Preto (UNAERP)
dc.date.accessioned2015-08-06T16:13:07Z
dc.date.available2015-08-06T16:13:07Z
dc.date.issued2015
dc.description.abstractThis work reports the experimental evaluation of physical and gas permeation parameters of four spinel-based investments developed with or without inclusion of sacrificial fillers. Data were compared with those of three commercial formulations. Airflow tests were conducted from 27 to 546°C, and permeability coefficients were fitted from Forchheimer's equation. Skeletal densities found for spinel- (ρs = 3635 ± 165 kg/m3) and phosphate-bonded (ρs = 2686 ± 11 kg/m3) samples were in agreement with the literature. The developed investments were more porous and less permeable than commercial brands, and the differences were ascribed to the different pore morphologies and hydraulic pore sizes of ceramic matrices. The inclusion of both fibers and microbeads resulted in increases of total porosity (42.6–56.6%) and of Darcian permeability coefficient k1 (0.76 × 10−14–7.03 × 10−14 m2). Air permeation was hindered by increasing flow temperatures, and the effect was related to the influence of gas viscosity on ΔP, in accordance with Darcy's law. Casting quality with molten titanium (CP Ti) was directly proportional to the permeability level of the spinel-based investments. However, the high reactivity of the silica-based investment RP and the formation of α-case during casting hindered the benefits of the highest permeability level of this commercial brand.en
dc.description.affiliationUnespUniversidade Estadual Paulista Júlio de Mesquita Filho, Departamento de Materiais Odontológicos e Prótese, Faculdade de Odontologia de Araraquara, Araraquara, Rua Humaitá, 1680, centro, CEP 14801-903, SP, Brasil
dc.format.extent306-318
dc.identifierhttp://onlinelibrary.wiley.com/doi/10.1111/ijac.12194/abstract
dc.identifier.citationInternational Journal of Applied Ceramic Technology, v. 12, n. 2, p. 306-318, 2015.
dc.identifier.doi10.1111/ijac.12194
dc.identifier.issn1546-542X
dc.identifier.lattes2851339311179809
dc.identifier.urihttp://hdl.handle.net/11449/125784
dc.language.isoeng
dc.relation.ispartofInternational Journal of Applied Ceramic Technology
dc.relation.ispartofjcr1.165
dc.rights.accessRightsAcesso restrito
dc.sourceCurrículo Lattes
dc.subjectTitânioen
dc.subjectFundição odontológicaen
dc.subjectPrótese dentáriaen
dc.subjectReabilitação oralen
dc.titleMicrostructural, physical, and fluid dynamic assessment of spinel-based and phosphate-bonded investments for dental applicationsen
dc.typeArtigo
unesp.author.lattes2851339311179809
unesp.author.orcid0000-0002-0734-7926[5]
unesp.campusUniversidade Estadual Paulista (Unesp), Faculdade de Odontologia, Araraquarapt
unesp.departmentMateriais Odontológicos e Prótesept

Arquivos

Coleções

Artigos - Materiais Odontológicos e Prótese - FOAR