Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive

Página do item simplificado
dc.contributor.authorValarelli, Ivaldo De Domenico [UNESP]
dc.contributor.authorGomes Battistelle, Rosane Ap
dc.contributor.authorPereira Bueno, Marcus Antonio
dc.contributor.authorBezerra, Barbara Stolte
dc.contributor.authorCampos, Cristiane I. de
dc.contributor.authorAlves, Manoel C. de S.
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2015-03-18T15:56:08Z
dc.date.available2015-03-18T15:56:08Z
dc.date.issued2014-01-01
dc.description.abstractThis study evaluated the physical and mechanical characteristics of particleboards made of bamboo waste from the species Dendrocalamus giganteus bonded with two different types of adhesives: urea-formaldehyde (UF) and a castor oil based adhesive (M). Thus, eight types of particleboards were produced in the proportions of 6%, 8%, 10% and 12% for each adhesive. The results showed that particleboards produced with UF and M adhesives had acceptable behavior for physical tests according to the Brazilian standard NBR 14810. The results attained in mechanical tests (MOR and MOE), for all particleboards, were below the requirements for structural usage. This indicates that the residue of bamboo is a feasible raw material alternative for particleboards produced for non structural purposes, such as liners, partitions and other uses for internal seal. Regarding the adhesives, the particleboards produced with UF particleboards showed superior results for both physical and mechanical characteristics, when compared to M particleboards with the same percentage of adhesive.en
dc.description.affiliationUniv Estadual Paulista Julio de Mesquita Filho UN, Fac Engn Bauru, Programa Posgrad Engn Prod, Sao Paulo, Brazil
dc.description.affiliationUniv Estadual Paulista Julio de Mesquita Filho UN, Fac Engn Ind Madeireira, Sao Paulo, Brazil
dc.description.affiliationUnespUniv Estadual Paulista Julio de Mesquita Filho UN, Fac Engn Bauru, Programa Posgrad Engn Prod, Sao Paulo, Brazil
dc.description.affiliationUnespUniv Estadual Paulista Julio de Mesquita Filho UN, Fac Engn Ind Madeireira, Sao Paulo, Brazil
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
dc.description.sponsorshipIdFAPESP: 07/59434-9
dc.format.extent1-6
dc.identifierhttp://dx.doi.org/10.1590/S1517-70762014000100002
dc.identifier.citationMateria-rio De Janeiro. Rio De Janeiro Rj: Univ Fed Rio De Janeiro, Lab Hidrogenio, v. 19, n. 1, p. 1-6, 2014.
dc.identifier.doi10.1590/S1517-70762014000100002
dc.identifier.fileS1517-70762014000100002.pdf
dc.identifier.issn1517-7076
dc.identifier.lattes1216644357418833
dc.identifier.orcid0000-0001-9669-6820
dc.identifier.scieloS1517-70762014000100002
dc.identifier.urihttp://hdl.handle.net/11449/117435
dc.identifier.wosWOS:000340432700002
dc.language.isoeng
dc.publisherUniv Fed Rio De Janeiro, Lab Hidrogenio
dc.relation.ispartofMateria-rio De Janeiro
dc.relation.ispartofjcr0.340
dc.relation.ispartofsjr0,188
dc.rights.accessRightsAcesso aberto
dc.sourceWeb of Science
dc.subjectparticleboarden
dc.subjectrecycle materialsen
dc.subjectcompositesen
dc.subjectadhesivesen
dc.subjectcastor oil based adhesiveen
dc.titlePhysical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesiveen
dc.typeArtigo
dcterms.rightsHolderUniv Fed Rio De Janeiro, Lab Hidrogenio
unesp.author.lattes9897620753143611[4]
unesp.author.lattes1216644357418833[5]
unesp.author.orcid0000-0002-8459-4664[4]
unesp.author.orcid0000-0001-9669-6820[5]
unesp.campusUniversidade Estadual Paulista (Unesp), Instituto de Ciências e Engenharia, Itapevapt

Arquivos

Pacote Original
Agora exibindo 1 - 1 de 1
Imagem de Miniatura
Nome:
S1517-70762014000100002.pdf
Tamanho:
487.63 KB
Formato:
Adobe Portable Document Format
Baixar

Coleções

Artigos - Engenharia Industrial Madeireira - Itapeva