INFLUENCE OF THE VENEER-FRAMEWORK INTERFACE ON THE MECHANICAL BEHAVIOR OF CERAMIC VENEERS: A NONLINEAR FINITE ELEMENT ANALYSIS

Página do item simplificado
dc.contributor.authorLazari, Priscilla Cardoso
dc.contributor.authorSotto-Maior, Bruno Salles
dc.contributor.authorRocha, Eduardo Passos [UNESP]
dc.contributor.authorCamargos, Germana de Villa
dc.contributor.authorDel Bel Cury, Altair Antoninha
dc.contributor.institutionUniversidade Estadual de Campinas (UNICAMP)
dc.contributor.institutionUniv Fed Juiz de Fora
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2015-03-18T15:54:01Z
dc.date.available2015-03-18T15:54:01Z
dc.date.issued2014-10-01
dc.description.abstractStatement of problem. The chipping of ceramic veneers is a common problem for zirconia-based restorations and is due to the weak interface between both structures.Purpose. The purpose of this study was to evaluate the mechanical behavior of ceramic veneers on zirconia and metal frameworks under 2 different bond-integrity conditions.Material and methods. The groups were created to simulate framework-veneer bond integrity with the crowns partially debonded (frictional coefficient, 0.3) or completely bonded as follows: crown with a silver-palladium framework cemented onto a natural tooth, ceramic crown with a zirconia framework cemented onto a natural tooth, crown with a silver-palladium framework cemented onto a Morse taper implant, and ceramic crown with a zirconia framework cemented onto a Morse taper implant. The test loads were 49 N applied to the palatal surface at 45 degrees to the long axis of the crown and 25.5 N applied perpendicular to the incisal edge of the crown. The maximum principal stress, shear stress, and deformation values were calculated for the ceramic veneer; and the von Mises stress was determined for the framework.Results. Veneers with partial debonding to the framework (frictional coefficient, 0.3) had greater stress concentrations in all structures compared with the completely bonded veneers. The metal ceramic crowns experienced lower stress values than ceramic crowns in models that simulate a perfect bond between the ceramic and the framework. Frameworks cemented to a tooth exhibited greater stress values than frameworks cemented to implants, regardless of the material used.Conclusion. Incomplete bonding between the ceramic veneer and the prosthetic framework affects the mechanical performance of the ceramic veneer, which makes it susceptible to failure, independent of the framework material or complete crown support.en
dc.description.affiliationUniv Estadual Campinas, Piracicaba Dent Sch, Dept Prosthodont & Periodontol, Piracicaba, SP, Brazil
dc.description.affiliationUniv Fed Juiz de Fora, Juiz de Fora Dent Sch, Dept Restorat Dent, Juiz De Fora, MG, Brazil
dc.description.affiliationSao Paulo State Univ, Aracatuba Dent Sch, Dept Dent Mat & Prosthodont, Sao Paulo, Brazil
dc.description.affiliationUnespSao Paulo State Univ, Aracatuba Dent Sch, Dept Dent Mat & Prosthodont, Sao Paulo, Brazil
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
dc.description.sponsorshipIdFAPESP: 11/03555-8
dc.format.extent857-863
dc.identifierhttp://dx.doi.org/10.1016/j.prosdent.2014.01.022
dc.identifier.citationJournal Of Prosthetic Dentistry. New York: Mosby-elsevier, v. 112, n. 4, p. 857-863, 2014.
dc.identifier.doi10.1016/j.prosdent.2014.01.022
dc.identifier.issn0022-3913
dc.identifier.lattes3383392287039820
dc.identifier.urihttp://hdl.handle.net/11449/116723
dc.identifier.wosWOS:000342543500028
dc.language.isoeng
dc.publisherElsevier B.V.
dc.relation.ispartofJournal Of Prosthetic Dentistry
dc.relation.ispartofjcr2.347
dc.relation.ispartofsjr1,087
dc.rights.accessRightsAcesso restrito
dc.sourceWeb of Science
dc.titleINFLUENCE OF THE VENEER-FRAMEWORK INTERFACE ON THE MECHANICAL BEHAVIOR OF CERAMIC VENEERS: A NONLINEAR FINITE ELEMENT ANALYSISen
dc.typeArtigo
dcterms.licensehttp://www.elsevier.com/about/open-access/open-access-policies/article-posting-policy
dcterms.rightsHolderElsevier B.V.
unesp.author.lattes3383392287039820
unesp.author.orcid0000-0002-4329-0437[5]
unesp.author.orcid0000-0002-9462-0299[2]
unesp.campusUniversidade Estadual Paulista (Unesp), Faculdade de Odontologia, Araçatubapt

Arquivos

Coleções

Artigos - Materiais Odontológicos e Prótese - FOA