Conversion Degree of Indirect Resin Composites and Effect of Thermocycling on Their Physical Properties

Página do item simplificado
dc.contributor.authorSouza, Rodrigo O. A. [UNESP]
dc.contributor.authorOezcan, Mutlu
dc.contributor.authorMichida, Silvia M. A. [UNESP]
dc.contributor.authorMelo, Renata M. de [UNESP]
dc.contributor.authorPavanelli, Carlos Augusto [UNESP]
dc.contributor.authorBottino, Marco A. [UNESP]
dc.contributor.authorSoares, Luis E. S.
dc.contributor.authorMartin, Airton A.
dc.contributor.institutionUniv Zurich
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniv Vale do Paraiba
dc.date.accessioned2014-05-20T14:05:07Z
dc.date.available2014-05-20T14:05:07Z
dc.date.issued2010-04-01
dc.description.abstractPurpose: This study evaluated the degree of conversion (DC) of four indirect resin composites (IRCs) with various compositions processed in different polymerization units and investigated the effect of thermal aging on the flexural strength and Vicker's microhardness.Materials and Methods: Specimens were prepared from four IRC materials, namely Gr 1: Resilab (Wilcos); Gr2: Sinfony (3M ESPE); Gr3: VITA VMLC (VITA Zahnfabrik); Gr4: VITA Zeta (VITA Zahnfabrik) using special molds for flexural strength test (N = 80, n = 10 per group) (25 x 2 x 2 mm(3), ISO 4049), for Vicker's microhardness test (N = 80, n = 10 per group) (5 x 4 mm(2)) and for DC (N = 10) using FT-Raman Spectroscopy. For both flexural strength and microhardness tests, half of the specimens were randomly stored in distilled water at 37 degrees C for 24 hours (Groups 1 to 4), and the other half (Groups 5 to 8) were subjected to thermocycling (5000 cycles, 5 to 55 +/- 1 degrees C, dwell time: 30 seconds). Flexural strength was measured in a universal testing machine (crosshead speed: 0.8 mm/min). Microhardness test was performed at 50 g. The data were analyzed using one-way and two-way ANOVA and Tukey's test (alpha = 0.05). The correlation between flexural strength and microhardness was evaluated with Pearson's correlation test (alpha = 0.05).Results: A significant effect for the type of IRC and thermocycling was found (p = 0.001, p = 0.001) on the flexural strength results, but thermocycling did not significantly affect the microhardness results (p = 0.078). The interaction factors were significant for both flexural strength and microhardness parameters (p = 0.001 and 0.002, respectively). Thermocycling decreased the flexural strength of the three IRCs tested significantly (p < 0.05), except for VITA Zeta (106.3 +/- 9.1 to 97.2 +/- 14 MPa) (p > 0.05) when compared with nonthermocycled groups. Microhardness results of only Sinfony were significantly affected by thermocycling (25.1 +/- 2.1 to 31 +/- 3.3 Kg/mm(2)). DC values ranged between 63% and 81%, and were not significantly different between the IRCs (p > 0.05). While a positive correlation was found between flexural strength and microhardness without (r = 0.309) and with thermocycling (r = 0.100) for VITA VMLC, negative correlations were found for Resilab under the same conditions (r = -0.190 and -0.305, respectively) (Pearson's correlation coefficient).Conclusion: Although all four IRCs presented nonsignificant DC values, flexural strength and microhardness values varied between materials with and without thermocycling.en
dc.description.affiliationUniv Zurich, Dent Mat Unit, Ctr Dent & Oral Med, Clin Fixed & Removable Prosthodont & Dent Mat Sci, CH-8032 Zurich, Switzerland
dc.description.affiliationSão Paulo State Univ, Dept Dent Mat & Prosthodont, Sao Jose dos Campos Dent Sch, Sao Jose Dos Campos, Brazil
dc.description.affiliationUniv Vale do Paraiba, Fac Hlth Sci, Dept Dent Mat & Operat Dent, FCS,UNIVAP, Sao Jose Dos Campos, Brazil
dc.description.affiliationUniv Vale do Paraiba, Inst Res & Dev, Lab Biomed Vibrat Spect, IPD,UNIVAP, Sao Jose Dos Campos, Brazil
dc.description.affiliationUnespSão Paulo State Univ, Dept Dent Mat & Prosthodont, Sao Jose dos Campos Dent Sch, Sao Jose Dos Campos, Brazil
dc.format.extent218-225
dc.identifierhttp://dx.doi.org/10.1111/j.1532-849X.2009.00551.x
dc.identifier.citationJournal of Prosthodontics-implant Esthetic and Reconstructive Dentistry. Malden: Wiley-blackwell, v. 19, n. 3, p. 218-225, 2010.
dc.identifier.doi10.1111/j.1532-849X.2009.00551.x
dc.identifier.issn1059-941X
dc.identifier.lattes6087378734666740
dc.identifier.lattes9234456003563666
dc.identifier.urihttp://hdl.handle.net/11449/22840
dc.identifier.wosWOS:000290116200008
dc.language.isoeng
dc.publisherWiley-Blackwell
dc.relation.ispartofJournal of Prosthodontics-implant Esthetic and Reconstructive Dentistry
dc.relation.ispartofjcr1.745
dc.rights.accessRightsAcesso restrito
dc.sourceWeb of Science
dc.subjectDegree of conversionen
dc.subjectflexural strengthen
dc.subjectindirect resin compositesen
dc.subjectVicker's hardnessen
dc.titleConversion Degree of Indirect Resin Composites and Effect of Thermocycling on Their Physical Propertiesen
dc.typeArtigo
dcterms.licensehttp://olabout.wiley.com/WileyCDA/Section/id-406071.html
dcterms.rightsHolderWiley-blackwell
unesp.author.lattes6087378734666740
unesp.author.lattes9234456003563666
unesp.campusUniversidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, São José dos Campospt

Arquivos

Licença do Pacote
Agora exibindo 1 - 2 de 2
Nenhuma Miniatura disponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição:
Nenhuma Miniatura disponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição:

Coleções

Artigos - Materiais Odontológicos e Prótese - ICT