Portaferramentas para torneamento com refrigeração interna baseada na mudança de fase do fluido
Carregando...
Data
2010-06-17
Autores
Vicentin, Gilmar Cavalcante [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
A crescente produtividade de aumento na produtividade em operações de usinagem toma cada vez mais importante o desenvolvimento de novas ferramentas de corte e novos métodos de manufatura, os quais devem ter a capacidade de preencher a demanda atual. Deste modo, muitos esforços têm sido direcionados para permitir a utilização de velocidade de corte cada vez maiores. Um grande desafio é controlar a temperatura durante o processo de usinagem, uma vez que a temperatura aumenta com o aumento da velocidade de corte, reduzindo a dureza a quente da ferramenta e alimentando os mecanismos de desgaste. Para minimizar estes efeitos, vários métodos de refrigeração têm sido propostos, cada um com suas vantagens e desvantagens. Os métodos convencionais de refrigeração, que utilizam fluidos de corte, embora possuam eficiência reconhecida, adicionam custos ao processo, além de serem causadores de problemas relacionados com o meio ambiente e com a saúde dos operadores. Neste contexto a usinagem a seco, associada com o emprego de ferramenta com alta dureza a quente, tem sido um bom método para evitar os problemas mencionados. Outra opção é a usinagem criogênica, que utiliza ferramentas de metal duro em temperaturas abaixo de -150ºC, utilizando, para isso, nitrogênio líquido como fluido refrigerante. Entretanto, este método traz alguns problemas, como a necessidade de equipamentos especiais com tamanho significante ao lado da máquina-ferramenta. Neste estudo é proposto o desenvolvimento e a construção de um sistema de refrigeraçã de ferramenta para o processo de tornemaneto, com baixo custo e manutenção simples, composto por um porta-ferramenta, com um fluido refrigerante passando internamente ao seu corpo em um circuito fechado, onde o fluido evapora em uma câmara abaixo do inserto de usinagem, removendo assim calor da ferramenta. O fluido refrigerante passa então através...
The growing need of increase in productivity in machining operations emphasizes the importance of the development of new cutting tools and new manufacturing methods, which have the capacity to fulfill the present demand. In this way, many efforts are directed to enable the utilization of higher cutting speeds. One great challenge is to control the temperature during the machining process, since the temperature rises with the increase of the cutting speed, reducing the hot hardness of the cutting tool and accelerating the tool wear mechanism. To minimize these effects, many cooling methods have been proposed, each one with advantages and disadvantages. The conventional cooling methods, which use cutting fluids, although have recognized efficiency, add costs to the process, besides to cause problems regarding to the environment and operators health. In this context, dry machining, associated with the employment of tools with high hot hardness, has been a good method to avoid these problems. Another option is the cryogenic machinig, which utilizes carbide tools in temperatures lower than - 150ºC, using, for this, liquid nitrogen as cooling fluid. However, this method brings some problems, like the need of special devices with significant size around the machine-tool. In this work, it is proposed the development and the construction of a cooling tool system for turning process, with low cost and simple maintenance, composed by a tool-holder, with a cooling fluid flowing within its body in a loop circuit, where the fluid evaporates just under the insert location, removing heat from it. The cooling fluid passes through a heat exchanger where it condensates and a new cyble is started. As result the development system provides a tool life equal or better than with the cutting fluid application, with clear economic and environmental advantages
The growing need of increase in productivity in machining operations emphasizes the importance of the development of new cutting tools and new manufacturing methods, which have the capacity to fulfill the present demand. In this way, many efforts are directed to enable the utilization of higher cutting speeds. One great challenge is to control the temperature during the machining process, since the temperature rises with the increase of the cutting speed, reducing the hot hardness of the cutting tool and accelerating the tool wear mechanism. To minimize these effects, many cooling methods have been proposed, each one with advantages and disadvantages. The conventional cooling methods, which use cutting fluids, although have recognized efficiency, add costs to the process, besides to cause problems regarding to the environment and operators health. In this context, dry machining, associated with the employment of tools with high hot hardness, has been a good method to avoid these problems. Another option is the cryogenic machinig, which utilizes carbide tools in temperatures lower than - 150ºC, using, for this, liquid nitrogen as cooling fluid. However, this method brings some problems, like the need of special devices with significant size around the machine-tool. In this work, it is proposed the development and the construction of a cooling tool system for turning process, with low cost and simple maintenance, composed by a tool-holder, with a cooling fluid flowing within its body in a loop circuit, where the fluid evaporates just under the insert location, removing heat from it. The cooling fluid passes through a heat exchanger where it condensates and a new cyble is started. As result the development system provides a tool life equal or better than with the cutting fluid application, with clear economic and environmental advantages
Descrição
Palavras-chave
Usinagem, Refrigeração, Torneamento, Corte a seco, Refrigeração interna, Mudança de fase, Turning, Dry cutting, Internal cooling, Phase change
Como citar
VICENTIN, Gilmar Cavalcante. Portaferramentas para torneamento com refrigeração interna baseada na mudança de fase do fluido. 2010. 88 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Engenharia, 2010.