Publication: Wear evaluation of an AISI 1020 steel coated with PEEK
Loading...
Date
Advisor
Coadvisor
Graduate program
Undergraduate course
Journal Title
Journal ISSN
Volume Title
Publisher
Type
Work presented at event
Access right
Abstract
PEEK (Poly-ether-ether-ketone) coatings have been attracted interest from some industry sectors due to its good wear resistance. In this study the wear resistance of a AISI 1020 steel coated with PEEK it was compared with that the AISI 52100 steel quenched and tempered to a hardness of 60HRc. The wear tests were performed in a fixed-ball micro-wear machine, using three different loads in the dry condition and using a lubricant. It was found that the PEEK coating presented a better wear performance than the AISI 52100 steel in dry condition and a wear performance close to the lubricated AISI 52100 steel while the PEEK layer maintains its integrity. In the case of the lubricated tests, the AISI 52100 steel provided the best performance among the samples tested. Copyright © (2010) by Associação Brasileira de Metalurgia Materiais e Mineração (ABM).
Description
Keywords
Coating, PEEK (poly-ether-ether-ketone), Wear
Language
English
Citation
65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, v. 5, p. 4457-4462.
