Publicação: Rapid determination of zinc in foods by flow injection analysis with flame AAS using gradient calibration method
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
A calibration method was developed using flow injection analysis (FI) with a Gradient Calibration Method (GCM). The method allows the rapid determination of zinc In foods (approximately 30 min) after treatment with concentrated sulphuric acid and 30% hydrogen peroxide, and analysis with flame atomic absorption spectrometry (FAAS). The method provides analytical results with a relative standard deviation of about 2% and requires less time than by conventional FI calibration. The electronic selection of different segments along the gradient and monitoring of the technique covers wide concentration ranges while maintaining the inherent high precision of flow injection analysis. Concentrations, flow rates, and flow times of the reagents were optimized in order to obtain best accuracy and precision. Flow rates of 10 mL/min were selected for zinc. In addition, the system enables electronic dilution and calibration where a multipoint curve can be constructed using a single sample injection.
Descrição
Palavras-chave
hydrogen peroxide, sulfuric acid, zinc, accuracy, analytic method, atomic absorption spectrometry, calibration, flame atomic absorption spectrometry, flow injection analysis, flow rate, food analysis, intermethod comparison
Idioma
Inglês
Como citar
Atomic Spectroscopy, v. 25, n. 5, p. 221-225, 2004.
