Publicação: Micro Welding of Ni-based Alloy Monel 400 Thin Foil by Pulsed Nd:YAG laser
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Elsevier B.V.
Tipo
Trabalho apresentado em evento
Direito de acesso
Acesso aberto
Resumo
In this study a pulsed Nd:YAG laser was used to join Monel 400 thin foil with 100 mu m thickness. Pulse energy was varied from 1.0 to 2.25J at small increments of 0.25J. The macro and microstructures were analyzed by optical microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the bottom foil dilution rate, it is possible to weld Monel 400 thin foil. The process appeared to be very sensitive to the gap between couples.
Descrição
Palavras-chave
Laser welding, Nd:YAG, Monel 400, Thin foil, Tensile shear test
Idioma
Inglês
Como citar
Lasers In Manufacturing 2011: Proceedings of The Sixth International Wlt Conference on Lasers In Manufacturing, Vol 12, Pt B. Amsterdam: Elsevier B.V., v. 12, p. 347-354, 2011.
