Publicação:
Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

dc.contributor.authorSouza, J. V C
dc.contributor.authorNono, M. C A
dc.contributor.authorOliveira, R. M.
dc.contributor.authorRibeiro, M. V. [UNESP]
dc.contributor.authorSilva, O. M M
dc.contributor.institutionInstituto Nacional de Pesquisas Espaciais (INPE)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionCTA-IAE/AMR
dc.date.accessioned2014-05-27T11:23:45Z
dc.date.available2014-05-27T11:23:45Z
dc.date.issued2008-12-01
dc.description.abstractDuring gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.en
dc.description.affiliationINPE, Av. dos Astronautas, 1.758, S. J. Campo s - SP, CEP. 12245-970
dc.description.affiliationFEG-UNESP, Av.Ariberto Ferreira da Cunha, 333, Guaratinguetá - SP, CEP. 12516-410
dc.description.affiliationCTA-IAE/AMR, Pça. Merechal do Ar Eduardo Gomes, 50, S. J. Campo S - SP, CEP. 12228-904
dc.description.affiliationUnespFEG-UNESP, Av.Ariberto Ferreira da Cunha, 333, Guaratinguetá - SP, CEP. 12516-410
dc.format.extent598-603
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/MSF.591-593.598
dc.identifier.citationMaterials Science Forum, v. 591-593, p. 598-603.
dc.identifier.doi10.4028/www.scientific.net/MSF.591-593.598
dc.identifier.issn0255-5476
dc.identifier.scopus2-s2.0-58149107154
dc.identifier.urihttp://hdl.handle.net/11449/70738
dc.language.isoeng
dc.relation.ispartofMaterials Science Forum
dc.relation.ispartofsjr0,180
dc.rights.accessRightsAcesso aberto
dc.sourceScopus
dc.subjectCeramics cutting tools
dc.subjectCutting forces
dc.subjectFlank wear
dc.subjectRoughness
dc.subjectTemperature
dc.subjectAdvanced Ceramics
dc.subjectCutting depths
dc.subjectCutting edges
dc.subjectCutting speeds
dc.subjectDry cuttings
dc.subjectExcessive heats
dc.subjectGray cast irons
dc.subjectHigh temperatures
dc.subjectMechanical energies
dc.subjectMetal removing
dc.subjectRake faces
dc.subjectShear zones
dc.subjectTool performances
dc.subjectCast iron
dc.subjectCeramic materials
dc.subjectComputer control systems
dc.subjectCutting
dc.subjectMachine tools
dc.subjectMachining
dc.subjectMechanical properties
dc.subjectMetal casting
dc.subjectMetal cutting
dc.subjectMetal working tools
dc.subjectPowder metals
dc.subjectPowders
dc.subjectSintering
dc.subjectCutting tools
dc.titleStudy of cutting forces on machinability properties of gray cast iron using new ceramics cutting toolsen
dc.typeTrabalho apresentado em evento
dcterms.licensehttp://www.scientific.net/
dspace.entity.typePublication

Arquivos

Coleções