Logo do repositório

Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel

Página do item simplificado
dc.contributor.authorHeck, S. C.
dc.contributor.authorNeto, A. L.
dc.contributor.authorPicon, C. A. [UNESP]
dc.contributor.authorTotten, G. E.
dc.contributor.authorCasteletti, L. C.
dc.contributor.institutionEscola de Engenharia de São Carlos
dc.contributor.institutionDept. de Engenharia de Materiais
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionPortland State Univ.
dc.date.accessioned2022-04-28T19:08:42Z
dc.date.available2022-04-28T19:08:42Z
dc.date.issued2016-01-01
dc.description.abstractThis work investigates the effect of pack boriding time and temperature on the wear and corrosion resistance of AISI H13 tool steel. Steel samples were pack borided at 900 and 1000ºC for periods of 2 and 4 h; followed by non-abrasive fixed-ball microwear tests on borided and non-borided samples. The corrosion resistance was evaluated by potentiodynamic polarization tests in HCl 0.1 M. High hardness layers were formed on the samples for all treatment conditions employed. The layer's properties, such as hardness, thickness, layer/substrate interface morphology, and phases formed, were influenced by steel composition. For AISI H13 steel, which has a larger amount of alloying elements than carbon steel, the formed layers were hard, thin, with a smoother interface. For all treatment conditions, the presence of Fe2B, FeB, and CrB were identified. The wear and corrosion resistance of borided samples was significantly increased. The best results were obtained for samples borided at 1000ºC.en
dc.description.affiliationUniv. de São Paulo Escola de Engenharia de São Carlos Departamento de Engenharia de Materiais, 1100 Avenida João Dagnone Ave. Santa Angelina, Sao Paulo
dc.description.affiliationUniversidade Tecnológica Federal do Paraná Dept. de Engenharia de Materiais, 3131 Avenida dos Pioneiros ave, Jardim Morumbi, Parana
dc.description.affiliationUniv. Estadual Paulista, 56 Brasil Sul ave, Centro, Ilha Solteira
dc.description.affiliationDepartment of Mechanical and Materials Engineering Portland State Univ.
dc.description.affiliationUnespUniv. Estadual Paulista, 56 Brasil Sul ave, Centro, Ilha Solteira
dc.description.sponsorshipConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
dc.description.sponsorshipIdCNPq: 305789/2012-0
dc.format.extent47-53
dc.identifierhttp://dx.doi.org/10.1520/MPC20150041
dc.identifier.citationMaterials Performance and Characterization, v. 5, n. 1, p. 47-53, 2016.
dc.identifier.doi10.1520/MPC20150041
dc.identifier.issn2165-3992
dc.identifier.scopus2-s2.0-85042138467
dc.identifier.urihttp://hdl.handle.net/11449/221017
dc.language.isoeng
dc.relation.ispartofMaterials Performance and Characterization
dc.sourceScopus
dc.subjectAISI H13
dc.subjectBoriding
dc.subjectCorrosion
dc.subjectPack boriding
dc.subjectWear
dc.titleInfluence of pack boriding on the wear and corrosion resistance of AISI H13 steelen
dc.typeArtigopt
dspace.entity.typePublication
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Ilha Solteirapt

Arquivos

Coleções

Ilha Solteira - FEIS - Faculdade de Engenharia