Publicação: In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
In this work, SiC particles were added to the molten pool during WAAM of a high strength low alloy steel. The introduction of these high melting point particles promoted grain refinement, and the precipitation of Fe3C due to SiC dissociation. The microstructural evolution was studied by optical and electron microscopy techniques and high energy synchrotron X-ray diffraction. Additionally, mechanical testing and hardness profiles were obtained for the SiC-containing and SiC-free parts. An improvement in the mechanical strength of the SiC-added WAAM parts was observed, which was attributed to the refined grain structure and finely dispersed Fe3C.
Descrição
Palavras-chave
HSLA steel, Inoculants, Mechanical testing, SiC, Synchrotron X-ray diffraction, Wire and Arc Additive Manufacturing
Idioma
Inglês
Como citar
Additive Manufacturing, v. 34.
