Publicação: The influence of the sintering system on PMN properties
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
PMN powder samples with PbO excess of 0, 1,2 and 3% were submitted to the pressing and sintering at 1200°C for 4h with a heating rate of 3°C/min. A new sintering system, developed at our laboratories, was used. It allows obtaining more information on the sintering process. The sintered samples in the new system were compared to sintered samples in the C system. The microstructure, dielectric properties and the effect of the PbO excess in different sintering systems were compared. The N system permitted to obtain a ceramic with better properties, such density, dielectric constant and very homogeneous microstructure.
Descrição
Palavras-chave
Ceramics, Dielectrics, Microstructure, PMN, Sintering, Lead magnesium niobate, Lead oxide, Pyrochlore phase ratio, Composition effects, Crystal microstructure, Density (specific gravity), Heating, Permittivity, Perovskite, Pressing (forming), Lead compounds
Idioma
Inglês
Como citar
Materials Science Forum, v. 416-418, n. 1, p. 597-602, 2003.
