Publicação: Dimensionless models of representative parameters of the spray obtained from effervescent atomizers
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
The goal of this study was to develop dimensionless models to estimate characteristic parameters associated with the atomization of light heating oil in effervescent atomizers. Parameters like the integral Sauter mean diameter (ID32), the spray cone half-angle (γ/2) and the liquid concentration half-angle (α/2) are considered. An analytical method was developed to determine the coefficient and exponents of an optimized dimensionless model. A total of seven dimensionless models (M1 – M7) were taken into consideration, from which seven models (M1 – M7) were used to estimate ID32, and five models (M3 – M7) were used to estimate γ/2 and α/2. In order to establish each set of models (M1 – M7 and M3 – M7), a total of 255 experimental results obtained from 34 effervescent atomizers of the outside-in gas injection configuration were used. The model M3 was selected to estimate ID32, γ/2 and α/2, returning values of R2 equal to 0.895, 0.762 and 0.809, respectively. The dimensionless models showed very good accuracy; therefore, the analytical method developed to propose dimensionless models is also validated.
Descrição
Palavras-chave
Atomization, Dimensional analysis, Light heating oil (LHO), Model, Spray
Idioma
Inglês
Como citar
Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, n. 4, 2023.
