Publicação: Applicability of standard delamination tests (double cantilever beam and end notch flexure) for 5HS fabric-reinforced composites in weft-dominated surface
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
Currently, the standard delamination tests established by ASTM (available for mode I and mix mode) are limited to unidirectional composites. Although some researchers have conducted delamination tests in woven composites, their information is still limited. In order to understand the propagation behavior and the value of fracture toughness of woven composites, this article evaluated a 5HS carbon/epoxy composite with a weft-dominated surface. Tests were conducted in double cantilever beam and end notch flexure configurations using an energy-based approach for data reduction in modes I and II, respectively. The results were assessed in terms of delamination resistance curves (R-curves). Both delamination modes showed consistent behaviors for extending the application of the standard procedures, as the energy variation can describe well the crack growth dependence of the irregular surface caused by the crimp, which was more pronounced for mode I.
Descrição
Palavras-chave
delamination, Fabrics/textiles, fracture toughness, laminate composites
Idioma
Inglês
Como citar
Journal of Composite Materials, v. 49, n. 21, p. 2557-2565, 2015.
