Influence of Roof Slope on Timber Consumption in Plane Trusses Design
Carregando...
Arquivos
Fontes externas
Fontes externas
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
North Carolina State Univ Dept Wood & Paper Sci
Tipo
Artigo
Direito de acesso
Arquivos
Fontes externas
Fontes externas
Resumo
The growing world consumption of wood in civil construction is evident, especially in structural roofing systems. Despite being from a renewable source, its rational and intelligent use is of vital importance in the execution of structural designs. Because it is a system that is recognized worldwide in the design of trussing roof structures, there are several empirical assumptions for structural calculation. To reduce timber consumption, some tile manufacturers suggest a 10% (6 degrees) slope between chords. However, after simulations of 11 slopes with angles from 5 degrees to 15 degrees, the timber consumption was inversely proportional to the slope, reaching a 90% difference between extreme angles. The method used to obtain the results was software designed according to the routines prescribed by the new draft standard of ABNT NBR 7190 (2021). Considering a prefabricated truss with 5 cm thickness sections, the design criterion was that of minimum height, increasing by 0.10 cm until all checks were satisfied. Finally, the minimum angle after which no strengthening is required on the bars was 10 degrees.
Descrição
Palavras-chave
Timber structures, Plane trusses, Slope, Design, Timber consumption
Idioma
Inglês
Citação
Bioresources. Raleigh: North Carolina State Univ Dept Wood & Paper Sci, v. 16, n. 4, p. 6749-6756, 2021.
