Addition of Nickel by the Watts Bath as a Way to Correct the Phase Balance on Nd:YAG Pulsed-Laser-Welded UNS S32750
| dc.contributor.author | da Cruz Junior, Eli J. | |
| dc.contributor.author | Seloto, Bruna B. [UNESP] | |
| dc.contributor.author | Ventrella, Vicente A. [UNESP] | |
| dc.contributor.author | Settimi, Alessio G. | |
| dc.contributor.author | Gennari, Claudio | |
| dc.contributor.author | Calliari, Irene | |
| dc.contributor.author | Zambon, Andrea | |
| dc.contributor.institution | Science and Technology of São Paulo | |
| dc.contributor.institution | Universidade Estadual Paulista (UNESP) | |
| dc.contributor.institution | University of Padua | |
| dc.date.accessioned | 2022-04-29T08:36:13Z | |
| dc.date.available | 2022-04-29T08:36:13Z | |
| dc.date.issued | 2022-01-01 | |
| dc.description.abstract | Obtaining a balanced microstructure in the fusion zone on a super duplex stainless steel (SDSS) weld is a challenge. The present work reports the use of the Watts bath to correct the phase balance on laser-welded SDSS. Three different Watts bath times were used, and the microstructure of the weld bead was evaluated. The Watts bath was efficient to correct the undesirable unbalanced microstructure resulting from SDSS laser welding as the austenite percentage increased. | en |
| dc.description.affiliation | Federal Institute of Education Science and Technology of São Paulo, Campus Itapetininga, Av. João Olímpio de Oliveira 1561 | |
| dc.description.affiliation | Mechanical Engineering Department UNESP São Paulo State University, Campus of Ilha Solteira, Av. Brasil 56 | |
| dc.description.affiliation | Department of Industrial Engineering University of Padua, Via Gradenigo, 6/a | |
| dc.description.affiliationUnesp | Mechanical Engineering Department UNESP São Paulo State University, Campus of Ilha Solteira, Av. Brasil 56 | |
| dc.format.extent | 25-28 | |
| dc.identifier | http://dx.doi.org/10.1007/s11661-021-06521-0 | |
| dc.identifier.citation | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, v. 53, n. 1, p. 25-28, 2022. | |
| dc.identifier.doi | 10.1007/s11661-021-06521-0 | |
| dc.identifier.issn | 1073-5623 | |
| dc.identifier.scopus | 2-s2.0-85118592481 | |
| dc.identifier.uri | http://hdl.handle.net/11449/229844 | |
| dc.language.iso | eng | |
| dc.relation.ispartof | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | |
| dc.source | Scopus | |
| dc.title | Addition of Nickel by the Watts Bath as a Way to Correct the Phase Balance on Nd:YAG Pulsed-Laser-Welded UNS S32750 | en |
| dc.type | Artigo | |
| dspace.entity.type | Publication | |
| unesp.department | Engenharia Mecânica - FEIS | pt |