Estudo e modelagem de sistemas de detecção de danos em estruturas mecânicas baseados na impedância eletromecânica
Carregando...
Arquivos
Data
2019-06-13
Autores
Antunes, Rothschild Alencastro
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
As técnicas de detecção de danos baseadas na Impedância Eletromecânica (EMI) baseiam-se na capacidade dos materiais piezoeléctricos em atuar como sensores e atuadores e contribuem para o desenvolvimento de sistemas de Structural Health Monitoring (SHM). As técnicas clássicas baseadas na EMI utilizam um transdutor Pb-Lead Zirconate Titanite (PZT ) ligado à estrutura monitorada e medem a assinatura de impedância do PZT. No entanto, as técnicas baseadas na EMI dependem de diferentes fatores, como faixa de frequência, número de PZT, temperatura ambiente, tipo de estrutura, entre outros. Assim, para demonstrar a eficácia dos métodos baseados na EMI, faz-se necessário realizar experimentos práticos, o que não é uma tarefa trivial, considerando tais fatores. Portanto, neste trabalho são estudados e propostos procedimentos para criar modelos numéricos, usando elementos finitos (FE), de técnicas baseadas na EMI usando o software PZFlex®. Além disso, os modelos desenvolvidos são usados para propor uma técnica inovadora de compensação de temperatura em sistemas baseados na EMI. Foram modeladas, simuladas e analisadas algumas estruturas clássicas como placa-de-alumínio/PZT e tubo-de-aço/PZT. Os resultados das simulações foram comparados com os equivalentes obtidos com modelos experimentais reais e mostraram-se fortemente correlacionados, indicando que o modelo proposto pode ser uma ferramenta poderosa para o desenvolvimento de técnicas de SHM baseadas na EMI. Foram realizadas simulações para analisar o comportamento das assinaturas sob o efeito da temperatura, mudando os valores dos parâmetros em função da temperatura, da cerâmica piezelétrica de PZT, da estrutura e do conjunto estrutura/PZT como um todo, para uma faixa de temperatura de -40ºC a 80ºC e uma faixa de frequência de 5 kHz a 125 kHz. Finalmente, é aplicado um mecanismo efetivo de compensação do efeito da variação da temperatura em toda faixa de frequência analisada.
The damage detection techniques based on the Electromechanical Impedance (EMI) rely on the ability of piezoelectric materials in acting as sensors and actuators and contribute to the development of Structural Health Monitoring (SHM) systems. The classical EMI-based techniques use a Pb-Lead Zirconate Titanite (PZT) transducer bonded to the monitored structure and measure the impedance signature of the PZT. However, the techniques based on EMI depend on different factors, such as frequency range, number of PZTs, environmental temperature, type of structure, among others. Thus, to demonstrate the effectiveness of EMI-based methods, it is necessary to carry out practical experiments, which is not a trivial task considering such factors. Therefore, in this work, it is studied and proposed procedures to create numerical models of techniques based on the EMI, using finite elements (FE) and the PZFlex® software. In addition, the developed models are used to propose an innovative temperature compensation technique for EMI-based systems. Some classical structures were modelled, simulated and analyzed, such as aluminum plate/PZT and steel pipe/PZT. The results of the simulations were compared with the equivalents obtained by experimental models and showed to be strongly correlated, indicating that the proposed model can be a powerful tool for the development of EMI-based SHM techniques. Simulations were performed to analyze the behavior of the signatures under the effect of temperature, by changing the parameters values of the PZT piezoelectric ceramic and the structure, separately and together, as a function of temperature, for the temperature range from -40 °C to 80 °C and the frequency range from 5kHz to 125kHz. Finally, an effective temperature compensation mechanism is applied in the analyzed frequency range.
The damage detection techniques based on the Electromechanical Impedance (EMI) rely on the ability of piezoelectric materials in acting as sensors and actuators and contribute to the development of Structural Health Monitoring (SHM) systems. The classical EMI-based techniques use a Pb-Lead Zirconate Titanite (PZT) transducer bonded to the monitored structure and measure the impedance signature of the PZT. However, the techniques based on EMI depend on different factors, such as frequency range, number of PZTs, environmental temperature, type of structure, among others. Thus, to demonstrate the effectiveness of EMI-based methods, it is necessary to carry out practical experiments, which is not a trivial task considering such factors. Therefore, in this work, it is studied and proposed procedures to create numerical models of techniques based on the EMI, using finite elements (FE) and the PZFlex® software. In addition, the developed models are used to propose an innovative temperature compensation technique for EMI-based systems. Some classical structures were modelled, simulated and analyzed, such as aluminum plate/PZT and steel pipe/PZT. The results of the simulations were compared with the equivalents obtained by experimental models and showed to be strongly correlated, indicating that the proposed model can be a powerful tool for the development of EMI-based SHM techniques. Simulations were performed to analyze the behavior of the signatures under the effect of temperature, by changing the parameters values of the PZT piezoelectric ceramic and the structure, separately and together, as a function of temperature, for the temperature range from -40 °C to 80 °C and the frequency range from 5kHz to 125kHz. Finally, an effective temperature compensation mechanism is applied in the analyzed frequency range.
Descrição
Palavras-chave
SHM, EMI, PZT, Detecção de danos, Elementos finitos, Compensação temperatura, Damage detection, Finite elements, Temperature compensation