Effect of Ce(III) and Ce(IV) ions on the structure and active protection of PMMA-silica coatings on AA7075 alloy
Nenhuma Miniatura disponível
Data
2021-08-15
Autores
Trentin, A. [UNESP]
Harb, S. V. [UNESP]
Uvida, M. C. [UNESP]
Marcoen, K.
Pulcinelli, S. H. [UNESP]
Santilli, C. V. [UNESP]
Terryn, H.
Hauffman, T.
Hammer, P. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
This work investigates the effect of Ce(III) and Ce(IV) additives on the structure and anti-corrosion properties of poly(methyl methacrylate) (PMMA)-silica coatings on AA7075 aluminium alloy. The results revealed that intermediate Ce(IV) loadings (500 and 1000 ppm) result in a dense hybrid network with a less defective polymeric phase, extending the service time of AA7075 up to 835 days in 3.5% NaCl. Although both additives provide long-term protection, the self-healing ability was observed only for Ce(IV) addition, favoured by the formation of oxides/hydroxides at pH∼3. These properties make the 4 μm-thick PMMA-silica-Ce(IV) coatings very interesting for chromium-free protection technologies.
Descrição
Palavras-chave
Aluminium alloy, EIS, Inhibition, Intermetallics, Organic coatings, SIMS
Como citar
Corrosion Science, v. 189.