Produção de biodiesel a partir de óleo residual reciclado e realização de testes comparativos com outros tipos de biodiesel e proporções de mistura em um moto-gerador
Carregando...
Arquivos
Data
2010-02-26
Autores
Dib, Fernando Henrique [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Neste trabalho são analisadas técnicas de produção do biodiesel a partir do óleo residual reciclado, visando a diversificação da matriz energética brasileira e minimização dos impactos ambientas decorrentes do descarte inadequado desses óleos. Antes do início da produção de biodiesel é necessária a realização de um pré-tratamento deste óleo, o que envolve processos de filtragem, secagem e determinação do teor de acidez, seguida de neutralização, pois de acordo com a porcentagem de ácidos graxos livres presentes na matéria-prima é que os métodos para obtenção dos ésteres são adotados. Primeiramente, foram realizados testes laboratoriais em pequena escala para produção de biodiesel, utilizando como matérias prima o óleo residual reciclado e o óleo de soja degomado para efeito comparativo, tendo sido utilizado hidróxido de sódio como catalisador e experimentadas as rotas metílica e etílica, não tendo sido obtidos resultados satisfatórios neste último caso. Em seguida, a produção foi expandida para uma escala semi-piloto, através da utilização de um reator com capacidade de produzir entre 75 e 80 litros de biodiesel por batelada, sendo neste caso utilizado apenas óleo residual reciclado e processo de transesterificação através da rota metílica, tendo o hidróxido de sódio como catalisador. Depois disso, foi feita a caracterização básica do biodiesel produzido, utilizando-se os equipamentos disponíveis, e foram realizados testes comparativos com outros tipos de biodiesel (Comercial, Vegetal e Animal) e frações de misturas (B25, B50, B75 e B100), tendo como base o biodiesel comercial (B5). Por fim, foram feitos testes com esses combustíveis em um moto-gerador diesel de 6 kVA, variando-se a carga de 0 a 3 kW e determinando-se o consumo específico e a temperatura dos gases de exaustão...
This study analyzes the technical production of biodiesel from waste oil recycling, aimed at diversifying the Brazilian energy matrix and minimizing the environmental impacts of inadequate disposal of waste oils. Before the production of biodiesel it is necessary to perform a previous treatment of this oil, which involves processes of filtration, drying and determination of acidity, followed by neutralization, because according to the percentage of free fatty acids present in the raw material is that the methods for obtaining the esters are defined. Firstly, laboratory tests were performed on a small scale biodiesel production using raw materials like soybean oil and recycle waste soybean oil for comparison, having been used sodium hydroxide as catalyst and tested methyl and ethyl routes, being no obtained satisfactory results in this last case. Then, the production was expanded to a semi-pilot scale, using a reactor that can produces between 75 and 80 liters of biodiesel per batch, being in which case only used recycle waste oil and the transesterification process using methanol route, with sodium hydroxide as catalyst. After that, a basic characterization of biodiesel had been done, using equipment available, and were conducted comparative tests with other types of biodiesel (commercial, vegetable and animal) and fractions of blends (B25, B50, B75 and B100), with commercial biodiesel like base of comparison (B5). Finally, tests were performed with these fuels in a 6 kVA diesel generator set, varying a resistive load from 0 to 3 kW and determining the specific consumption and temperature of the exhaust gases. Analyzing the results, it was verified that the physical and chemical properties measured are within acceptable limits, with density between 0,871 and 0,910 g/ml, viscosity between 3,9 and 6,1 cSt and flash point between 51 and 183°C,... (Complete abstract click electronic access below)
This study analyzes the technical production of biodiesel from waste oil recycling, aimed at diversifying the Brazilian energy matrix and minimizing the environmental impacts of inadequate disposal of waste oils. Before the production of biodiesel it is necessary to perform a previous treatment of this oil, which involves processes of filtration, drying and determination of acidity, followed by neutralization, because according to the percentage of free fatty acids present in the raw material is that the methods for obtaining the esters are defined. Firstly, laboratory tests were performed on a small scale biodiesel production using raw materials like soybean oil and recycle waste soybean oil for comparison, having been used sodium hydroxide as catalyst and tested methyl and ethyl routes, being no obtained satisfactory results in this last case. Then, the production was expanded to a semi-pilot scale, using a reactor that can produces between 75 and 80 liters of biodiesel per batch, being in which case only used recycle waste oil and the transesterification process using methanol route, with sodium hydroxide as catalyst. After that, a basic characterization of biodiesel had been done, using equipment available, and were conducted comparative tests with other types of biodiesel (commercial, vegetable and animal) and fractions of blends (B25, B50, B75 and B100), with commercial biodiesel like base of comparison (B5). Finally, tests were performed with these fuels in a 6 kVA diesel generator set, varying a resistive load from 0 to 3 kW and determining the specific consumption and temperature of the exhaust gases. Analyzing the results, it was verified that the physical and chemical properties measured are within acceptable limits, with density between 0,871 and 0,910 g/ml, viscosity between 3,9 and 6,1 cSt and flash point between 51 and 183°C,... (Complete abstract click electronic access below)
Descrição
Palavras-chave
Biodiesel, Metanol, Álcool, Transesterificação, Óleo de fritura usado, Catalisador ácido, Catalisador básico, Moto-gerador, Biodiesel, Transesterification, Waste cooking oil, Methanol, Ethanol, Acid catalyst, Basic catalyst, Motogenerator
Como citar
DIB, Fernando Henrique. Produção de biodiesel a partir de óleo residual reciclado e realização de testes comparativos com outros tipos de biodiesel e proporções de mistura em um moto-gerador. 2010. 114 f. Dissertação (mestrado) – Universidade Estadual Paulista, Faculdade de Engenharia de Ilha Solteira, 2010.