Effect of machining parameters on turning of VAT32® superalloy with ceramic tool

Página do item simplificado
dc.contributor.authorBonhin, Eduardo Pires [UNESP]
dc.contributor.authorDavid-Müzel, Sarah [UNESP]
dc.contributor.authorDe Souza, José Vitor Candido [UNESP]
dc.contributor.authorAlves, Manoel Cléber De Sampaio [UNESP]
dc.contributor.authorRibeiro, Marcos Valério [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2019-10-06T17:06:09Z
dc.date.available2019-10-06T17:06:09Z
dc.date.issued2019-05-19
dc.description.abstractThe objective of this research was to study the machining of superalloy VAT32® using alumina-based ceramic tool without cutting fluid, applying different machining parameters to evaluate the surface finish of parts, vibration and main wear of tools. For this, a turning process with a linear trajectory of 30 mm was performed, in which were collected data vibration and surface roughness of the stretch, as well as wear and damage in the tools. The turning tests were performed utilizing cutting speeds of 270, 280 and 300 m/min, a feed of 0.10, 0.18 and 0.25 m/rev and a cutting depth of 0.50 mm. With results, it was identified that the feed influenced significantly both the vibration and the system, since the cutting speed influenced only the vibration. Being that the best results happened for the smaller feed and greater cutting speed. It concludes that the machining of superalloy VAT32® with ceramic tool introduced herself promising.en
dc.description.affiliationSchool of Engineering Department of Materials and technology São Paulo State University (Unesp)
dc.description.affiliationUnespSchool of Engineering Department of Materials and technology São Paulo State University (Unesp)
dc.format.extent800-806
dc.identifierhttp://dx.doi.org/10.1080/10426914.2019.1594261
dc.identifier.citationMaterials and Manufacturing Processes, v. 34, n. 7, p. 800-806, 2019.
dc.identifier.doi10.1080/10426914.2019.1594261
dc.identifier.issn1532-2475
dc.identifier.issn1042-6914
dc.identifier.lattes4994819346783458
dc.identifier.lattes2001862427592659
dc.identifier.scopus2-s2.0-85063440168
dc.identifier.urihttp://hdl.handle.net/11449/190220
dc.language.isoeng
dc.relation.ispartofMaterials and Manufacturing Processes
dc.rights.accessRightsAcesso aberto
dc.sourceScopus
dc.subjectalumina
dc.subjectchips
dc.subjectEDS
dc.subjectmonitoring
dc.subjectRoughness
dc.subjectturning
dc.subjectVAT32®
dc.subjectvibration
dc.subjectwear
dc.titleEffect of machining parameters on turning of VAT32® superalloy with ceramic toolen
dc.typeArtigo
unesp.advisor.lattes2001862427592659
unesp.author.lattes4994819346783458

Arquivos

Coleções

Artigos - Materiais e Tecnologia - FEG