Comparação entre valores de ensaios experimentais e calculados da resistência ao embutimento da madeira de Pinus taeda L.

Carregando...
Imagem de Miniatura

Data

2014-03-01

Autores

Almeida, Diego Henrique de
Ferro, Fabiane Salles
Varanda, Luciano Donizeti
Christoforo, Andre Luis
Rocco Lahr, Francisco Antonio
Molina, Julio Cesar [UNESP]
Calil Junior, Carlito

Título da Revista

ISSN da Revista

Título de Volume

Editor

Univ Federal Vicosa

Resumo

To design connections between timber parts with metal dowels (nails or bolts), two phenomena must be considered: bending of the metal dowel and the embedment strength in the wood. The Brazilian Standard ABNT NBR 7190:1997 proposes the methods used in the laboratory tests to determine the embedment strength with the metal dowell and, in the absence of testing, specifies relations to calculate the embedment strength from the compression strength. The aim of this research was to compare the embedment strength values obtained by experimental tests and calculated by the relationships established by the Brazilian Standard ABNT NBR 7190:1997. By the results of the hypothesis tests, it was possible to conclude that the estimate of the embedment strength parallel to the grain proposed by the Brazilian standard ABNT NBR 7190:1997, establishing equivalence with the strength compression results in the same direction, must be effective to the wood species Pinus taeda L., however, the same was not found in the perpendicular direction with respect to the grain, possibly explained by the alpha(e) values in the equation to calculed fe(90)

Descrição

Palavras-chave

Embedment strength, Connections, Timber structures

Como citar

Revista Arvore. Vicosa: Univ Federal Vicosa, v. 38, n. 2, p. 347-352, 2014.