Surface Integrity Analysis when Milling Ultrafine-grained Steels
Nenhuma Miniatura disponível
Data
2012-01-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal de São Carlos (UFSCar), Dept Engenharia Materials
Tipo
Artigo
Direito de acesso
Acesso aberto![Acesso Aberto](assets/repositorio/images/logo_acesso_aberto_simples.png)
![Acesso Aberto](assets/repositorio/images/logo_acesso_aberto_simples.png)
Resumo
This paper quantifies the effects of milling conditions on surface integrity of ultrafine-grained steels. Cutting speed, feed rate and depth of cut were related to microhardness and microstructure of the workpiece beneath machined surface. Low-carbon alloyed steel with 10.8 mu m (as-received) and 1.7 mu m (ultrafine) grain sizes were end milled using the down-milling and dry condition in a CNC machining center. The results show ultrafine-grained workpiece preserves its surface integrity against cutting parameters more than the as-received material. Cutting speed increases the microhardness while depth of cut deepens the hardened layer of the as-received material. Also, deformations of microstructure following feed rate direction were observed in workpiece subsurface.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Materials Research-ibero-american Journal of Materials. São Carlos: Universidade Federal de São Carlos (UFSCar), Dept Engenharia Materials, v. 15, n. 1, p. 125-130, 2012.