Parameterization technique for the continuation power flow using the trivial and tangent predictor

Página do item simplificado
dc.contributor.authorBonini Neto, A. [UNESP]
dc.contributor.authorAlves, D. A. [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-27T11:27:07Z
dc.date.available2014-05-27T11:27:07Z
dc.date.issued2012-11-01
dc.description.abstractThis paper presents efficient geometric parameterization techniques using the tangent and the trivial predictors for the continuation power flow, developed from observation of the trajectories of the load flow solution. The parameterization technique eliminates the Jacobian matrix singularity of load flow, and therefore all the consequent problems of ill-conditioning, by the addition of the line equations which pass through the points in the plane determined by the variables loading factor and the real power generated by the slack bus, two parameters with clear physical meaning. This paper also provides an automatic step size control around the maximum loading point. Thus, the resulting method enables not only the calculation of the maximum loading point, but also the complete tracing of P-V curves of electric power systems. The technique combines robustness with ease of understanding. The results to the IEEE 300-bus system and of large real systems show the effectiveness of the proposed method. © 2012 IEEE.en
dc.description.affiliationElectrical Engineering Department UNESP, Av. Brazil, 56, Cx. P. 31, 15385-000, Ilha Solteira
dc.description.affiliationUnespElectrical Engineering Department UNESP, Av. Brazil, 56, Cx. P. 31, 15385-000, Ilha Solteira
dc.identifierhttp://dx.doi.org/10.1109/TDC.2012.6281446
dc.identifier.citationProceedings of the IEEE Power Engineering Society Transmission and Distribution Conference.
dc.identifier.doi10.1109/TDC.2012.6281446
dc.identifier.issn2160-8555
dc.identifier.issn2160-8563
dc.identifier.lattes6566923858579760
dc.identifier.scopus2-s2.0-84867951269
dc.identifier.urihttp://hdl.handle.net/11449/73706
dc.identifier.wosWOS:000317001100046
dc.language.isoeng
dc.relation.ispartofProceedings of the IEEE Power Engineering Society Transmission and Distribution Conference
dc.rights.accessRightsAcesso aberto
dc.sourceScopus
dc.subjectContinuation Method
dc.subjectMaximum Loading Point
dc.subjectMultiple Solutions
dc.subjectParameterization
dc.subjectPower Flow
dc.subjectVoltage Collapse
dc.subjectContinuation method
dc.subjectMaximum loading points
dc.subjectMultiple solutions
dc.subjectPower flows
dc.subjectVoltage collapse
dc.subjectElectric load flow
dc.subjectElectric power transmission
dc.subjectExhibitions
dc.subjectJacobian matrices
dc.subjectLoading
dc.titleParameterization technique for the continuation power flow using the trivial and tangent predictoren
dc.typeTrabalho apresentado em evento
dcterms.licensehttp://www.ieee.org/publications_standards/publications/rights/rights_policies.html
unesp.author.lattes6566923858579760[2]
unesp.author.lattes9898242753869408[1]
unesp.author.orcid0000-0002-0250-489X[1]
unesp.campusUniversidade Estadual Paulista (Unesp), Faculdade de Engenharia, Ilha Solteirapt

Arquivos

Coleções

Artigos - Engenharia Elétrica - FEIS