Influence of drilling parameters on thrust force and burr on fiber metal laminate (Al 2024-T3/glass fiber reinforced epoxy)

Página do item simplificado
dc.contributor.authorBonhin, Eduardo Pires [UNESP]
dc.contributor.authorDavid-Müzel, Sarah [UNESP]
dc.contributor.authorGuidi, Erick Siqueira [UNESP]
dc.contributor.authorBotelho, Edson Cocchieri [UNESP]
dc.contributor.authorRibeiro, Marcos Valério [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.date.accessioned2022-04-29T08:40:40Z
dc.date.available2022-04-29T08:40:40Z
dc.date.issued2020-01-01
dc.description.abstractIn the present work a fiber metal laminate (FML) of three aluminum sheets interspersed with eight layers of glass fiber reinforced epoxy was used. The processes were carried out using 4000 and 8000 rpm and a 0.05; 0.10 and 0.20 feed in mm/rev with a coated carbide drills (TiAlN) with Ø4.8 mm. With the found results, it could be stated that the thrust force was affected significantly by the feed with 99.75% of contribution, the burrs thickness was influenced by spindle speed and feed (27.59% and 63.14% respectively), and burrs height by feed and interaction between factors (21.33% and 75.76%).en
dc.description.affiliationSão Paulo State University (Unesp) School of Engineering Department of Materials and Technology, 12.516-410, Guaratinguetá
dc.description.affiliationSão Paulo State University (Unesp) School of Engineering Department of Mechanical, 12.516-410, Guaratinguetá
dc.description.affiliationUnespSão Paulo State University (Unesp) School of Engineering Department of Materials and Technology, 12.516-410, Guaratinguetá
dc.description.affiliationUnespSão Paulo State University (Unesp) School of Engineering Department of Mechanical, 12.516-410, Guaratinguetá
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
dc.format.extent338-341
dc.identifierhttp://dx.doi.org/10.1016/j.procir.2021.02.035
dc.identifier.citationProcedia CIRP, v. 101, p. 338-341.
dc.identifier.doi10.1016/j.procir.2021.02.035
dc.identifier.issn2212-8271
dc.identifier.scopus2-s2.0-85125942915
dc.identifier.urihttp://hdl.handle.net/11449/230533
dc.language.isoeng
dc.relation.ispartofProcedia CIRP
dc.sourceScopus
dc.subjectComposite
dc.subjectDrilling
dc.subjectMonitoring
dc.titleInfluence of drilling parameters on thrust force and burr on fiber metal laminate (Al 2024-T3/glass fiber reinforced epoxy)en
dc.typeTrabalho apresentado em evento
unesp.departmentEngenharia Mecânica - FEGpt
unesp.departmentMateriais e Tecnologia - FEGpt

Arquivos

Coleções

Guaratinguetá - FEG - Faculdade de Engenharia e Ciências