Publicação: Painéis de partículas homogêneas fabricados com resíduos lignoceluósicos e resina alternativa para aplicação em pisos
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
Particleboards consist of composite materials with a wide range of applications, among these, for floors, where abrasion is an important property. This research aimed to investigate, with the aid of the Brazilian standard ABNT (2008), abrasion resistance (surface wear) of particleboards manufactured with waste of Eucalyptus sp. wood for employment on indoor environments floors. The factors investigated in the manufacture of the panels were resin type (castor oil-based polyurethane resin, urea formaldehyde), the use or not of varnish coating based on polyester, and the number of cycles for the abrasion test (1000; 1300; 1600), leading to a full factorial design with 12 different treatments. The responses investigated were the wear mass loss, wear mass loss percentage, wear loss in thickness and wear loss percentage in thickness. The results showed higher number cycles values then AC2 and AC3 classes, reaching 2700 cycles according to the loss mass. In the statistical analysis, only the number of cycles factor was significant in the investigated properties, which implies equivalence results for the other factors and interactions evaluated.
Descrição
Palavras-chave
Abrasion resistance, Particleboards, Resins
Idioma
Português
Como citar
Scientia Forestalis/Forest Sciences, v. 44, n. 112, p. 1001-1007, 2016.
