Publicação: Influence of chromate, molybdate and tungstate on pit formation in chloride medium
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
It has been characterized and evaluated the 2024-T351 and 7050-T7451 aluminum alloys pitting corrosion in naturally aerated chloride aqueous solutions containing chromate, molybdate and tungstate. It has been carried out electrochemical and non-electrochemical immersion corrosion tests accompanied by surface metallography analysis using an optical microscopy. Chromate for the two alloys and in molybdate for 7050 has corrosion inhibiting effects, whereas tungstate promotes the pitting corrosion for these alloys. Quantitative surface analysis upon the alloys after immersion has indicated that pits are predominantly conical or quasi-conical and irregular. In general, pits have been wider than deep and the widest have been also the deepest. Despite inhibitor presence, when pits have been nucleated, they grow with the same intensity. © 2005 Elsevier B.V. All rights reserved.
Descrição
Palavras-chave
Aircraft alloys, Aluminum alloys, Image analysis, Pitting corrosion, Chromates, Electrochemistry, Metallography, Molybdenum compounds, Nucleation, Surface phenomena, Tungsten compounds, Corrosion tests, Surface analysis, Corrosion protection
Idioma
Inglês
Como citar
Applied Surface Science, v. 252, n. 4, p. 1117-1122, 2005.
