Publicação: Electrochemical treatment of Produced Water using Ti/Pt and BDD anode
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Esg
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
The applicability of electrochemical oxidation (EO) to treat a real petrochemical effluent was investigated using a lab electrochemical cell and pre-pilot plant scale reactor with Ti/Pt and BDD anode materials. The efficacy of EO in treating a real effluent was determined and the reactors compared at different applied current densities (j = 15, 30 and 60 mA cm(-2)). The results clearly indicate that an electrochemical pre-pilot reactor removes more than 97% of dissolved organic matter applying 15 mA cm(-2) at pH 6.0 and 25 degrees C after 30 min of electrolysis, consuming 3.37 kWh m(-3), and incurring a cost of around 0.57 USD m(-3). The results obtained provide valuable information regarding the EO scaling-up process, aimed at applying electrochemical technologies to treat actual effluents on a real scale.
Descrição
Palavras-chave
produced water, platinum, wastewater treatment, anodic oxidation, diamond electrode
Idioma
Inglês
Como citar
International Journal Of Electrochemical Science. Belgrade: Esg, v. 13, n. 8, p. 7894-7906, 2018.
