Logotipo do repositório

Phase formation in copper and calcium titanate dielectric ceramic obtained by polymeric precursor method

dc.contributor.authorBarbosa, Graciele Vieira
dc.contributor.authorGonçalves, Sabrina Vitor
dc.contributor.authorKawahara, Creuza Kimito Caceres
dc.contributor.authorAmoresi, Rafael Aparecido Ciola
dc.contributor.authorSilva, Margarete Soares da
dc.contributor.authorStropa, Jusinei Meireles
dc.contributor.authorde Oliveira, Lincoln Carlos Silva
dc.contributor.authorCavalheiro, Alberto Adriano
dc.contributor.institutionUniversidade Estadual de Mato Grosso do Sul (UEMS)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversidade Federal de Mato Grosso do Sul (UFMS)
dc.date.accessioned2019-10-06T15:21:40Z
dc.date.available2019-10-06T15:21:40Z
dc.date.issued2018-01-01
dc.description.abstractThe polycrystalline ceramic named calcium and copper titanate is a dielectric ceramic with very high dielectric constant applicable in several electronic devices. The powder form for that advanced ceramic can be synthesized through chemical route, like the Polymeric Precursor Method at relative lower temperatures the presence of alkaline earth cations harms the structural homogenization during the crystallization process. In this work, the calcium and copper titanate powder was obtained by Polymeric Precursors Method by imposing a slow thermal decomposition of polymeric precursor and several crushing steps before the calcination at 800 °C for 4 hours. The entire process was observed by thermogravimetric analysis and FTIR spectrometry, including the nitrogen adsorption-desorption isotherms and X-ray diffractometry techniques for calcined power samples. It was observed the crystallization of the cubic Im-3 Ca1/4Cu3/4TiO3 phase only starts after organics removal and full calcium carbonate elimination above 700 ºC, which is followed by pore elimination and particle sintering. The chemical synthetic route used in this work shows the ability to prepare CCT powders sample with very structural homogeneity, which characteristics are required to manufacturing many electronic devices.en
dc.description.affiliationCDTEQ – UEMS, Rua Emílio Mascoli, 275
dc.description.affiliationLIEC – UNESP, Rua Francisco Degni, 55
dc.description.affiliationCERNA-UEMS, Rod. Dourados-Itahum, Km 12, 351
dc.description.affiliationInQui – Universidade Federal de Mato Grosso do Sul (UFMS)
dc.description.affiliationUnespLIEC – UNESP, Rua Francisco Degni, 55
dc.format.extent20-25
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/MSF.930.20
dc.identifier.citationMaterials Science Forum, v. 930 MSF, p. 20-25.
dc.identifier.dimensionspub.1106995023
dc.identifier.doi10.4028/www.scientific.net/MSF.930.20
dc.identifier.issn0255-5476
dc.identifier.issn1662-9752
dc.identifier.orcid0000-0003-0464-3997
dc.identifier.orcid0000-0002-7523-6013
dc.identifier.orcid0000-0002-7721-0562
dc.identifier.orcid0000-0003-1281-3431
dc.identifier.scopus2-s2.0-85055099845
dc.identifier.urihttp://hdl.handle.net/11449/186976
dc.language.isoeng
dc.publisherTrans Tech Publications
dc.relation.ispartofMaterials Science Forum
dc.rights.accessRightsAcesso abertopt
dc.sourceScopus
dc.sourceDimensions
dc.subjectCCT
dc.subjectDielectric Titanate
dc.subjectThermal Analysis
dc.subjectXRD
dc.titlePhase formation in copper and calcium titanate dielectric ceramic obtained by polymeric precursor methoden
dc.typeTrabalho apresentado em eventopt
dspace.entity.typePublication
relation.isAuthorOfPublication977b1868-2854-49be-83f1-11703523621e
relation.isAuthorOfPublication.latestForDiscovery977b1868-2854-49be-83f1-11703523621e

Arquivos

Coleções