Logotipo do repositório
 

Publicação:
Study on the behavior of the Minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel

Página do item simplificado
dc.contributor.authorSilva, L. R.
dc.contributor.authorBianchi, E. C. [UNESP]
dc.contributor.authorCatai, R. E. [UNESP]
dc.contributor.authorFusse, R. Y. [UNESP]
dc.contributor.authorFrança, T. V. [UNESP]
dc.contributor.authorAguiar, P. R. [UNESP]
dc.contributor.institutionCentro Federal de Educação Tecnológica (CEFET)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-27T11:21:18Z
dc.date.available2014-05-27T11:21:18Z
dc.date.issued2005-04-01
dc.description.abstractThe behavior of the minimum quantity lubricant (MQL) technique was analyzed under different lubricating and cooling conditions when grinding ABNT 4340 steel. The comparative analysis of the residual stress values showed that residual compressive stresses were obtained under all the lubrication/cooling conditions and types of abrasive tools employed. The highest residual compressive stress obtained with the aluminum oxide grinding wheel with MQL under the condition of V= 30m/s for air and V= 40ml/h for lubricant was -376MPa against the -160MPa attained with conventional cooling, representing a 135% increase in residual compressive stress. The results show that method and quantity of lubricant and cooling are factors that influence the grinding process.en
dc.description.affiliationCentro Federal de Educação Tecnológica Minas Gerais CEFET-MG, Bairro Nova Suica, 30480-000 Belo Horizonte, MG
dc.description.affiliationUNESP - Universidade Estadual Paulista - Bauru Department of Mechanical Engineering, Av. Luiz carrijo Edmundo Coube, s/n, 17033-360 Bauru, SP
dc.description.affiliationUnespUNESP - Universidade Estadual Paulista - Bauru Department of Mechanical Engineering, Av. Luiz carrijo Edmundo Coube, s/n, 17033-360 Bauru, SP
dc.format.extent192-199
dc.identifierhttp://dx.doi.org/10.1590/S1678-58782005000200012
dc.identifier.citationJournal of the Brazilian Society of Mechanical Sciences and Engineering, v. 27, n. 2, p. 192-199, 2005.
dc.identifier.doi10.1590/S1678-58782005000200012
dc.identifier.file2-s2.0-20844443867.pdf
dc.identifier.issn1678-5878
dc.identifier.lattes1099152007574921
dc.identifier.lattes1455400309660081
dc.identifier.orcid0000-0002-9934-4465
dc.identifier.scieloS1678-58782005000200012
dc.identifier.scopus2-s2.0-20844443867
dc.identifier.urihttp://hdl.handle.net/11449/68183
dc.language.isoeng
dc.relation.ispartofJournal of the Brazilian Society of Mechanical Sciences and Engineering
dc.relation.ispartofjcr1.627
dc.relation.ispartofsjr0,362
dc.rights.accessRightsAcesso aberto
dc.sourceScopus
dc.subjectCBN and MQL
dc.subjectG ratio
dc.subjectGrinding
dc.subjectResidual stress
dc.subjectRoughness
dc.subjectTangential cutting force
dc.subjectCooling
dc.subjectCutting
dc.subjectGrinding (comminution)
dc.subjectLubricants
dc.subjectMachining
dc.subjectResidual stresses
dc.subjectSurface roughness
dc.subjectTesting
dc.subjectCubic boron nitride (CBN)
dc.subjectMinimum quantity lubricant (MQL)
dc.subjectStainless steel
dc.titleStudy on the behavior of the Minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steelen
dc.typeArtigo
dcterms.licensehttp://www.scielo.br/revistas/jbsmse/iaboutj.htm
dspace.entity.typePublication
unesp.author.lattes1099152007574921
unesp.author.lattes1455400309660081[6]
unesp.author.orcid0000-0002-9934-4465[6]
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Baurupt
unesp.departmentEngenharia Mecânica - FEBpt

Arquivos

Pacote Original

Agora exibindo 1 - 1 de 1
Imagem de Miniatura
Nome:
2-s2.0-20844443867.pdf
Tamanho:
364.21 KB
Formato:
Adobe Portable Document Format
Baixar

Coleções

Bauru - FEB - Faculdade de Engenharia