Publicação: Characterization of tellurium dioxide thin films obtained through the Pechini method
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
Tellurium dioxide (TeO2) thin films were deposited on silicon substrates through the Pechini method, after which they were heat treated at different temperatures. The heat treatment temperatures were defined from the thermogravimetry-differential scanning calorimetry (TG-DSC) data of the precursor gel. The effects of the heat treatment on the structural properties were investigated through X-ray diffraction (XRD), atomic force microscopy, and Raman spectroscopy. The TG-DSC data showed four different weight loss steps due to the reduction of telluric acid to tellurium, the removal of the excess ethylene glycol, the decomposition of citric acid, and the degradation of polyester. The XRD and Raman data showed the presence of the γ- and α-TeO2 phases in the films treated at 400–500 °C. Lattice parameters of the observed crystalline phases were determined by Rietveld refinement, with which it was possible to evaluate the crystallite size and microstrain using the Williamson-Hall method. The heat treatment temperature directly influenced the crystallite size and the surface roughness of the films, which showed similar behaviors with the temperature. [Figure not available: see fulltext.].
Descrição
Palavras-chave
Atomic force microscopy, Rietveld refinement, Sol-gel, Tellurite dioxide, Thin Films, X-ray diffraction
Idioma
Inglês
Como citar
Journal of Sol-Gel Science and Technology, v. 103, n. 2, p. 378-385, 2022.
