Publicação:
Effect of compatibilizer in acrylonitrile-butadiene-styrene toughened nylon 6 blends: Ductile-brittle transition temperature

dc.contributor.authorAraújo, E. M.
dc.contributor.authorHage, E.
dc.contributor.authorCarvalho, A. J. F.
dc.contributor.institutionUniversidade Federal de Campina Grande (UFCG)
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-27T11:21:00Z
dc.date.available2014-05-27T11:21:00Z
dc.date.issued2003-12-05
dc.description.abstractThe ductile-brittle transition temperatures were determined for compatibilized nylon 6/acrylonitrile-butadiene-styrene (PA6/ABS) copolymer blends. The compatibilizers used for those blends were methyl methacrylate-co-maleic anhydride (MMA-MAH) and MMA-co-glycidyl methacrylate (MMA-GMA). The ductile-brittle transition temperatures were found to be lower for blends compatibilized through maleate modified acrylic polymers. At room temperature, the PA6/ABS binary blend was essentially brittle whereas the ternary blends with MMA-MAH compatibilizer were supertough and showed a ductile-brittle transition temperature at -10°C. The blends compatibilized with maleated copolymer exhibited impact strengths of up to 800 J/m. However, the blends compatibilized with MMA-GMA showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures.en
dc.description.affiliationDepartment of Materials Engineering Univ. Federal de Campina Grande, Campina Grande PB-58109-970
dc.description.affiliationDepartment of Materials Engineering Universidade Federal de Sao Carlos, Sao Carlos SP-13565-905
dc.description.affiliationInstitute of Chemistry of Sao Carlos Universidade do Estado de Sao Paulo, Sao Carlos SP-13560-970
dc.format.extent2643-2647
dc.identifierhttp://dx.doi.org/10.1002/app.13013
dc.identifier.citationJournal of Applied Polymer Science, v. 90, n. 10, p. 2643-2647, 2003.
dc.identifier.doi10.1002/app.13013
dc.identifier.issn0021-8995
dc.identifier.scopus2-s2.0-0242368821
dc.identifier.urihttp://hdl.handle.net/11449/67584
dc.language.isoeng
dc.relation.ispartofJournal of Applied Polymer Science
dc.relation.ispartofjcr1.901
dc.relation.ispartofsjr0,543
dc.rights.accessRightsAcesso restrito
dc.sourceScopus
dc.subjectAcrylonitrile-butadiene-styrene
dc.subjectBlends
dc.subjectCompatibilization
dc.subjectNylon 6
dc.subjectToughness
dc.subjectAmines
dc.subjectComposition effects
dc.subjectCopolymers
dc.subjectImpact testing
dc.subjectNylon polymers
dc.subjectOrganic acids
dc.subjectPhase transitions
dc.subjectPolymer blends
dc.subjectTemperature
dc.subjectCompatibilizers
dc.subjectCompatibilizing agents
dc.subjectDuctile-brittle transitions
dc.subjectMaleated copolymers
dc.subjectABS resins
dc.subjectmechanical property
dc.subjectnylon 6
dc.subjectpolymer blend
dc.titleEffect of compatibilizer in acrylonitrile-butadiene-styrene toughened nylon 6 blends: Ductile-brittle transition temperatureen
dc.typeArtigo
dcterms.licensehttp://olabout.wiley.com/WileyCDA/Section/id-406071.html
dspace.entity.typePublication

Arquivos

Coleções