Publicação: FATIGUE IN CUSTOM 465 STAINLESS STEEL FOR AERONAUTIC APPLICATION
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Inegi-inst Engenharia Mecanica E Gestao Industrial
Tipo
Trabalho apresentado em evento
Direito de acesso
Acesso aberto
Resumo
This project was originated from the national aircraft industry requirements to reduce the use of coated materials with electroplated chromium or cadmium that produce waste, which is harmful to health or the environment. The selected material is a Custom 465 stainless steel used in the aeronautical field due to its high mechanical strength. Considering the load sustained by the wheel axis of the landing gear, the Custom 465 was tested in axial fatigue. The objective is to compare the behavior of the Custom 465 stainless steel with plated AISI 4340 steel coated with cadmium. Fractographic analysis was conducted using scanning electron microscopy. X-ray diffraction method was used to determine the residual stress field induced by shot peening.
Descrição
Palavras-chave
fatigue, Custom 465, shot peening
Idioma
Inglês
Como citar
Icem15: 15th International Conference On Experimental Mechanics. Porto: Inegi-inst Engenharia Mecanica E Gestao Industrial, 6 p., 2012.
