Publicação: Efeito da espessura da parede no desempenho hidráulico de mangueiras gotejadoras
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
The aim of this study was to evaluate the hydraulic performance of drip hoses of different thickness which use the same dripper model. Four drip hoses (T1, T2, T3 and T4) with different thickness (0.2; 0.25; 0.38 and 0.90 mm, respectively) were evaluated. The following parameters were evaluated: coefficient of manufacturing variation (Cv), relationship between flow x pressure and wall thickness. The results showed that the hose Cv met the requirements of ISO 9261:2004, except for T2. According to the manual provided by the manufacturer, the equations specific to the hoses would have the same coefficients, as the emitters are from the same model. This observation did not match the results obtained in the experiment, which found different equations for each study drip hose. Also, using the same emitter type at a given pressure, the wider the wall thickness, the lower the emitter flow.
Descrição
Palavras-chave
Coefficient of manufacturing variation, Dripping irrigation, Flow x pressure relationship, ISO 9261:2004
Idioma
Português
Como citar
IRRIGA, v. 1, n. 1, p. 139-149, 2015.
