Publicação: Comparing phase detectors in analog Phase-Locked Loops
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
The Phase-Locked Loops, conceived in the 1930’s by Henri de Bellescize, and used in a large scale on TV sets and integrated services digital telecommunication networks are nowadays increasing their relevance, being present in the time-basis generation and detection either in integrated circuits or in smart-grids power distribution systems. Among the Phase-Locked Loop architecture components is the Phase Detector. The phase detection function is a measure of phase/frequency errors in the Phase-Locked Loop, with analog, hybrid and digital implementations. In most of the classical literature the phase detection function is implemented by a signal multiplier device that can be approximated by a sine function from the phase error. Additional simplifications made on the phase detection function approximates the Phase-Locked Loop to a Düffing system. The phase detection function usually generates oscillations, such as the double-frequency jitter, which is a sinusoidal signal with the double of the synchronization frequency. Nowadays, software implementation allows a considerable flexibility to the phase detection function. Therefore, the phase detection requires accurate modeling to guarantee precision to the obtained clock signals. This work presents a performance comparison between the multiplier, the sine and the Düffing detectors.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
European Physical Journal: Special Topics.
