Effect of drying different inclusion plasters on the mechanical properties of thermoactivated acrylic resins
Carregando...
Fonte externa
Fonte externa
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Fonte externa
Fonte externa
Resumo
This article aimed to evaluate some mechanical and chemical properties of acrylic thermoactivated resins by microwave energy, varying the condition and type of plaster. The groups were divided into Lucitone and Vipi-Wave groups, with or without previous treatment (drying) of type III and IV plasters. It was evaluated flexural strength, microhardness, roughness, porosity, residual monomer, and also, time and temperature relationship of plaster and acrylic resin during the polymerization cycles. The data were analyzed using Analysis of Variance (ANOVA) 5%, followed by Tukey's test. The results showed that the drying of the plaster influenced the results and the groups with dry plaster maintained a higher temperature permanence. Therefore, changes in the water condition contained in the inclusion plaster showed effects on the final properties of the acrylic resin, which may be a technical indicator for laboratory procedures in the manufacture of prosthetic devices.
Descrição
Palavras-chave
Acrylic resin, Dental plaster, Flexural strength, Hardness, Roughness
Idioma
Inglês
Citação
Polimeros, v. 31, n. 3, 2021.
