Publicação: Effects of substituting ytterbium for scandium on the microstructure and age-hardening behaviour of Al-Sc alloy
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Elsevier B.V.
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
In order to reduce the cost of Al-Sc alloys and maintain their mechanical properties, the microstructure and mechanical properties of Al-0.24 wt% Sc-0.07 wt% Yb in comparison with Al-0.28 wt% Sc alloys were studied. The aging behaviour, precipitate morphologies, precipitate coarsening and precipitation hardening of both alloys were investigated. The average diameter and the size distribution of nanoscale Al3Sc and Al-3(Sc,Yb) precipitates at various aging conditions were measured. Transmission electron microscopy (TEM) and high-resolution TEM were used to deeply understand the precipitate evolution. A maximum hardness around 73 (HV30) was obtained with a precipitate diameter from 4.3 to 5.6 nm for both alloys. (c) 2014 Elsevier B.V. All rights reserved.
Descrição
Palavras-chave
Aluminium-scandium alloys, Ytterbium, Age-hardening, Precipitate coarsening, TEM, High-resolution TEM
Idioma
Inglês
Como citar
Materials Science And Engineering A-structural Materials Properties Microstructure And Processing. Lausanne: Elsevier Science Sa, v. 601, p. 70-77, 2014.
