Logo do repositório
 

Improvement of thermoplastic elastomer degradation resistance by low-energy plasma immersion ion bombardment

dc.contributor.authorResende, R. C. [UNESP]
dc.contributor.authorRibeiro, R. P. [UNESP]
dc.contributor.authorWaldman, W. R.
dc.contributor.authorCruz, N. C. [UNESP]
dc.contributor.authorAraujo, J. R.
dc.contributor.authorRangel, E. C. [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)
dc.contributor.institutionLawrence Berkeley National Laboratory
dc.contributor.institutionQuality and Technology
dc.date.accessioned2020-12-12T02:30:20Z
dc.date.available2020-12-12T02:30:20Z
dc.date.issued2020-02-15
dc.description.abstractThermoplastic elastomers (TPE) have been used instead of traditional elastomers, since they combine the low cost of raw material with easy processing and recyclability. When used in sealing components, the polyester-based TPE, or COPEs, are most common. Although COPEs have mechanical properties similar to those of elastomers, they have limited resistance to corrosion in chlorinated water. Argon Plasma Immersion Ion Implantation (IIIP) treatments were applied to alter the morphology and chemical composition of the COPE surface, with the goal of increasing its chemical inertia in chlorinated water while preserving the desired bulk properties. The effect of ion bombardment energy on the elemental composition, chemical structure, morphology, topography and mechanical properties of COPEs was evaluated, along with whether changes in such properties affected the degradation resistance of the material in chlorinated water. Treatments were performed for 60 min in radiofrequency argon plasmas (13.56 MHz, 5.0 Pa), with the power of the excitation signal varying from 10 to 150 W. Since variations in signal power changed the self-bias potential of the driven electrode, and samples were positioned at this electrode, the ion bombardment intensity was varied in the different treatments. Immediately after treatments, surfaces became more hydrophilic than the as-received ones, but after being aged in air, some samples became hydrophobic. Dehydrogenation was the main alteration attained in chemical composition, inducing changes in the overall chemical structure. Species removal from less resistant regions promoted creation of nanometric structures randomly distributed on the surface but without promoting changes in the volumetric mechanical properties of COPE. The most pronounced surface changes were observed for the sample treated in plasmas at 150 W, which also presented the highest resistance to chlorinated solution. This improvement suggests an increase in COPE performance in practice.en
dc.description.affiliationTechnological Plasmas Laboratory Paulista State University UNESP Science and Technology Institute of Sorocaba, Av. Três de Março, 511
dc.description.affiliationFederal University of São Carlos Sorocaba Campus UFSCAR, Sorocaba, SP, Brazil Rod. João Leme Dos Santos, Km 110
dc.description.affiliationMaterials Sciences Division Lawrence Berkeley National Laboratory, 1 Cyclotron Road
dc.description.affiliationMaterials Metrology Division National Institute of Metrology Quality and Technology, Duque de Caxias
dc.description.affiliationUnespTechnological Plasmas Laboratory Paulista State University UNESP Science and Technology Institute of Sorocaba, Av. Três de Março, 511
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
dc.description.sponsorshipIdFAPESP: 2012/14708-2
dc.identifierhttp://dx.doi.org/10.1016/j.matchemphys.2019.122467
dc.identifier.citationMaterials Chemistry and Physics, v. 242.
dc.identifier.doi10.1016/j.matchemphys.2019.122467
dc.identifier.issn0254-0584
dc.identifier.scopus2-s2.0-85075533031
dc.identifier.urihttp://hdl.handle.net/11449/201352
dc.language.isoeng
dc.relation.ispartofMaterials Chemistry and Physics
dc.sourceScopus
dc.subjectChlorine degradation
dc.subjectCOPE
dc.subjectPlasma immersion ion implantation
dc.subjectThermoplastic elastomer
dc.subjectWettability
dc.titleImprovement of thermoplastic elastomer degradation resistance by low-energy plasma immersion ion bombardmenten
dc.typeArtigo
dspace.entity.typePublication
unesp.author.orcid0000-0003-4042-6738[2]
unesp.author.orcid0000-0002-0354-3890[4]
unesp.author.orcid0000-0001-7909-190X[6]
unesp.campusUniversidade Estadual Paulista (UNESP), Instituto de Ciência e Tecnologia, Sorocabapt
unesp.departmentEngenharia de Controle e Automação - ICTSpt

Arquivos